Wiz Posted December 11, 2008 Report Share Posted December 11, 2008 arn't people putting yfz shocks on banshee's (the fronts)? I don't quite understand why unless you get a good deal on them seems like you can buy elkas for the front for less than 400 bones.. Quote Link to comment Share on other sites More sharing options...
gixxer_sixxer Posted December 11, 2008 Report Share Posted December 11, 2008 This is a great topic - needs to be sticky'ed Quote Link to comment Share on other sites More sharing options...
desertdeweller Posted December 11, 2008 Report Share Posted December 11, 2008 handle grips haha I put an 01 raptor works rear shock on my shee haven`t tested it yet but its about an inch longer. Quote Link to comment Share on other sites More sharing options...
dirtfreak Posted December 12, 2008 Report Share Posted December 12, 2008 aren't the warrior foot pegs and floor boards the same as a banshee.i have a neighbor that has a 95 warrior and got to looking at it,seems like there is alot of parts that will interchange.the rear shock looks like it will bolt right in.i alsoknow the honda 300 ex shocks are direct fit to banshee,will give it a lower stance. Quote Link to comment Share on other sites More sharing options...
jimbob Posted December 12, 2008 Report Share Posted December 12, 2008 (edited) not sure if this has been mentioned BUT ive just fitted an 07 raptor rear shock to my shee with no mods at all. only thing is its slightly longer than the shee item so has to be compressed a little 1st, makes it sit nice and high at the back, also if your thinking of lowering the 98-02 yammy R1 shock bolts straight on but air box needs to be slighly modified to accommodate the piggy back bottle Edited December 12, 2008 by jimbob Quote Link to comment Share on other sites More sharing options...
dirtfreak Posted December 13, 2008 Report Share Posted December 13, 2008 i have a 07 r6 rear shock on mine,i run pods but it would clear the air box no problem.only thing i did to install the shock was to drill press the bushings on the shock where the bolts go through,the r6 has smaller mm bolts. Quote Link to comment Share on other sites More sharing options...
AButler16 Posted August 1, 2009 Report Share Posted August 1, 2009 does the YFZ450 and Banshee have the same hubs? Quote Link to comment Share on other sites More sharing options...
Steph G 350r raptor Posted February 19, 2018 Report Share Posted February 19, 2018 Does anyone know if the stock front bumpers for raptors and banshees are interchangeable ? Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted February 19, 2018 Report Share Posted February 19, 2018 8 hours ago, Steph G 350r raptor said: Does anyone know if the stock front bumpers for raptors and banshees are interchangeable ? They are not. Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted February 19, 2018 Report Share Posted February 19, 2018 On 8/1/2009 at 12:13 PM, AButler16 said: does the YFZ450 and Banshee have the same hubs? Front -no Rear -yes I figure it should be answered before it turned a decade old. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.