Jump to content

lets see those hot rods


sheerider1026

Recommended Posts

  • 2 months later...
  • 2 months later...
5.9 24 Valve Cummins. Haven't been down the 1/4 or on the rollers yet....but it'll haul for a 7000lbs+ truck.

 

Picture021.jpg

Picture022.jpg

 

wats next power elbow and intercooler and tuner??? airbox and super scoop maybe? thats wats on our dodge and it hauls too. itll burn off dualies lol nice trcuk man!!

Link to comment
Share on other sites

wats next power elbow and intercooler and tuner??? airbox and super scoop maybe? thats wats on our dodge and it hauls too. itll burn off dualies lol nice trcuk man!!

 

By "Power Elbow", are you talking about the Banks stuff?

 

Mods:

 

Goerend Transmission with Billet Flexplate and Billet Input

EGT, Trans Temp, Boost and Fuel Pressure Gauges

BHAF

Airdog 100 with Vulcan Draw Straw

HTT 3 Piece Exhaust Manifold

HTT 62/71/14 Turbo

4" exhaust from turbo, to 6" stack

Smarty stacked with TST PM3 Comp

DDP Stage 3 Injectors

 

I'll be doing more to the old girl as time goes on, but it's good for right now :thumbsup:

 

 

Link to comment
Share on other sites

By "Power Elbow", are you talking about the Banks stuff?

 

Mods:

 

Goerend Transmission with Billet Flexplate and Billet Input

EGT, Trans Temp, Boost and Fuel Pressure Gauges

BHAF

Airdog 100 with Vulcan Draw Straw

HTT 3 Piece Exhaust Manifold

HTT 62/71/14 Turbo

4" exhaust from turbo, to 6" stack

Smarty stacked with TST PM3 Comp

DDP Stage 3 Injectors

 

I'll be doing more to the old girl as time goes on, but it's good for right now :thumbsup:

 

yes we have all the banks stuff on ours and it runs pretty good dude. your truck looks good for the older style body. looks like it runs pretty good to yo!!

 

Link to comment
Share on other sites

MY 70 C-10 long box. She is a 1970 frame with a 1972 body on it. The frame was stripped and painted with gloss black implement paint. It has a 9inch rear end with 28 spline axles and 4:11 gears, a four link weld in rear setup with QA-1 adjustable show chrome coilovers. It has all new front suspension with new springs, shocks, lowering spindles. Dropped 3

Link to comment
Share on other sites

here are my 2 project cars:

1995 mustang cobra,owner since 97

347 R-block small hydraulic roller cam

Z-304 heads G-force T-56 6 spd trans

twin turbo 61mm dual ball bearing

1075 rwhp 9.20@157 mph

http://www.fquick.com/garages/viewgallery....amp;carid=25695

 

 

 

1992 GMC Typhoon owned since october of 08

truck was stock when purchased,over winter transplanted built 402 iron blocked LS1,ETP heads,twin GT35R turbos,liquid intercooler,very small hydraulic roller,4L80E by FLT,12 bolt with 4 link

retained all wheel drive,a/c and power steering,truck still appears stock

on cooper zeon radials it went 10.50@135mph on 10.5 pounds of boost,will definatley go 9's with 4 m/t drag radials

http://www.fquick.com/garages/viewgallery....amp;carid=25691

http://www.fquick.com/garages/viewgallery....amp;carid=26376

 

 

 

Link to comment
Share on other sites

for some reason my photobucket has locked me out?

o

but heres my place holder for my 86 mustang coupe. i am swapping out the twin turbo 302 for a 460. possibly turbo but i dont know where theres room

 

i also have an 87 merkur xr4ti.full poly suspension, limited slip diff, 4 puck clutch, ported exhaust manifold, .60/.63 turbo alcohol injection and 22psi. its my nice weather daily driver.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...