Young Guns Racing

Bob I cannot pm you for some reason. I'm VERY interested in the pro wedges. Please text me @ 540-903-461eight

X2. If you've already decided on redline why the wait? Call em up and talk to them! They are super helpful guys and put out numbers to back up their stuff! Im sending a set of dune ported cylinders to them from my stock cyld 4 mil build and im having them slightly adjusted more towards a drag port and a set of domes cut for race fuel. Plus i've heard no complaints about cam's pro modded transmissions. Camatv did mine and i love it, but for this build im going to have a 2-5 override done to a stock trans i have laying around. I love my pro mod so im going to save it for another build I'll do in the future.

Defenitly going to need suspension to make use.of all ur newly found power a stock swing arm length is going to make ur bike a wheelie machine. I'd say a +4 is worth investing

.019 for ring gap seems pretty loose to me....could be experiencing "blow by"? When you broke a ring did it chunk the piston? Possibly something blocking up one of your pipes? Maybe a plug issuse - swap them over? Did you swap the plug caps over like previously stated and see if the problem follows or stays the same? Reed valves in good shape? I know its at the point of frustration but slow down a bit, take ur time and REALLY look into everything that could be the cause, persistence will pay off and you will end up fixing it. Good luck

x2

a nice stock cylinder 4 mil will be very impressive. Call Cam @ redline racing. He would have my vote to hook you up for a NASTY pump fuel 4 mil setup. I think it'll be everything you want and more! Pipes are personal prefference, I run shearer pipes but i like CPI's just the same, they both make great power! Hard to go wrong, talk to your builder you select and see which pipe they would recommend! Edit::: Oh and be ready to spend some money...this build will NOT come cheap. While its torn down, you should also talk to cam about "pro modding" your trans. Camatv here on the hq did mine, looooove it.

I'll take the bolt kit. Pm me ur paypal

x2 all things I did when i built my stock cylinder 4 mil. Its already been mentioned but if you do not do something with that suspension, your new found power will almost be "useless". Stock suspension wont help you get it all to the ground. You've got more money to spend lol you will be 34973247x happier after you do tho

PM on the shaw.

No prob. anytime

I have a stock set of a arms. They are greasy and will need cleaning. I think they are black, IDK if they've been rattle canned or not. I also have a set of stock silvers.

I know lol everytime I see a set I miss them too. I will go to the 4 snows if i have to but i like the wedges so much better

Pm sent on billet shifter

Pm sent on basket

Got some!!!!! THANKS TO ALL!

bump, nobody?

PM sent on link.

Already run them and like em more than 4 snows. Could always use a spare set 22-11-8's. Let me know what u got! Pm me. Thanks!

Bump. Anyone?

Stock hangers keep breaking on me so im looking to see what guys got for aftermarket hangers! I always seem to miss out on a set when they come up for sale lol. Anyhow PM me what ya got! Thanks

Need a set of marvin shaws going to put on trx450r. Looking for fronts to be about 14.25 and rear to be around 13.75 or so. Please PM me or text me @ 540-903-461eight. Thanks!! Let me know what ya got!

x3239070207 Hell of a good deal! Nasty always seems to have what you need lol. He's helped me out a ton and I wouldnt hesitate to buy from him again in heartbeat!

x2 That mis adjusted/worn shift shaft can be a nightmare! My pro mod trans shifted like butter until recently, upon teardown mine came loose! Ive got some further investigations to do because in N she started trying to find 1st i think i may have worn a shift fork. Anyhow these situations arnt all that bad, remain calm and use ur head! good luck

Got both, O-rings I dont really want to sell but anyhow, they are about $20 new - thats what I'll take for them just because im going to turn around and buy myself another set. The domes I'll take $40 for. They are like BRAND NEW. I will PM pics

Need nice cool head w/ studs for small bore banshee. Domes are not a requirement as im getting custom cuts with the new build. PM me and LMK what ya got! thanks