Judge1

I don't know the material banshee keys are made from but most hardware stores have a selection of these keys.

I have a set on mine and they are much better than stock, very plush and don't bottom out. Even if they need a new charge and oil maybe some seals your talking a $100 .... still very cheap upgrade.

Sand what is that? I'm glad to here some one gets to go riding... some of us don't have a motor to go riding with!

Very sad to see such a young person go too soon. What is the story here? How did she die?

Had same problem with stock carbs with tors removal not idling right.... must have pulled them apart 10 times changing jets adjusting air and idle screws. Nothing seemed to help. I asked around and found that if you remove the stock carbs and through those pieces of shit in the trash and get new bigger carbs problem went away! Don't bother with 28mm carbs get 30mm or 33mm you will need them for future mods.

Thank you!!! I thought I was not going to get any input on this. That is how I have them mocked up now but thought it looked a little funny.

Where did you hear that they don't make the wide pegs for the banshee? They are listed on their web site and I spoke with them today and said they were back ordered. That leads me to believe they still make them. I know sponsors don't make them but they are dealers for a lot of other companies and thought some one might have some in stock. I don't like the avenger ones and will not deal with them again. I bought a swinger from them and it was a nightmare.

I need IMS pegs now, no one has these! These things are a rare commodity these days no one has them not even roll design! They keep saying they will have them in a couple of weeks, that has been two months. Not even the ones listed on ebay that say they have 10 available are in stock. Ok site sponsors that are always pimp'n themselves, whatcha got?

How do I tell what side the a arms go on? They are and older set of burgard +2+1 sport arms. Does the straighter portion of the arms go to the front or the back? Thanks

I am not a drag racer so I thought you guys could explain some thing to me. At LS Oklahoma all the drag bikes line up 10 across and race over and over when all you can see is sand and smoke. It's not possible to tell who won unless one bike pulls away. Back in the day they used to have organized events with different classes so at the end of the day you knew who was the fastest. Now they have a 300 ft groomed track in the new portion of the park and no one uses it. Last sand fest I went to watch some races at the track and only saw a half dozen bikes racing. I Left because it was boring and went out to the dunes to find dozens of dragers all racing not knowing who wins. What is the point? Why don't they use the track?

Glad to hear your stress level has come down and I hope the new guy frees up your time! Now get off the computer and finish my motor!!!!

Maybe nothing electrical! What is your compressioin? May need higher octain fuel. Detionation will make it boggy.

Not trying to jack your topic but I'm in the middle of a build and need to know about anti seize. Do I need to use this stuff with steel fasteners? What is the difference between grease and anti seize? What about axle and hubs? I used belray waterproof tacky grease on those parts. It seems any after market bolt on comes with stainless steel, like pipe hangers grab bars etc. Should I use anti seize or lock tight on parts like that?

Anyone ever notice the threads that get the most hits are bull shit topics like this? How many people on here earn their liviing racing a quad? I bet it is les than 1% That said lets stick to keeping this fun.

Has anyone ever used these modquad bronze bushings? I ordered a set and they don't even come close to fitting! I have burgard arms wich are a pain anyway because they use 14mm ball joints and now this. Do I have to just use the delrin ones? Help, this build is going to put in the nut house!! I always have to fix something to fix something else.

I need a set of stock bore, stock port cylinders for a reasonable price.

Are the jugs at 64mm? No port work? I am just double checking because I am in need of bone stock cylinders so FAST can build my 4mil dune port. Would you sell just the jugs and if so how much? Thanks

ODI lock on grips are the only way to go!!

What is the boiling point of coolant 50/50 in banshee's? What is optimal operating temp.? Mine usually runs around 180 on automotive coolant and was thinking of going to engine ice but thought this might mask a lean condition as I rejet. I have sunk a fortune in a FAST 4mil. and dune port and want to do everything right! Any thoughts?

You people need to get a fucking life!!!! I don't know who is dumber, you for writting this thread or me for reading it.

I live close to you guys and was just wondering what riding spot you were at when this happened?

I got my +2 swingarm from them and It came without the chain guide mounts. This was after I waited 3 weeks to get it because they shipped it to the wrong customer and didn't bother to tell me. I got with Edwin and he was going to make it right after I told him give me what I want or refund my money. I can't fugure out what the deal is with these people maybe they are trying to unload old inventory. However everyone i have talked to over there sounds like a moron. Long story short, they make a good product just have poor customer service.

I have a swing arm on order from these guys that should be here this week and yes Edwin is a moon. Their products are made from 4130 chromoly heat treated and powder coated. They claim that their swing arms are constructed to provide correct chasis ride height so they claim that skid plate mounts should not be put on arms longer than plus 2 because it will angle the skid plate down to far in the front? That being said, he told me when I ordered mine that a chain guide would interfere with a stock skid because it has the guide built in. That tells me that my swing arm would have the chain guide tabs. I told him I was running after market plate and would not be an issue. If they don't send me a +2 swing arm with skid plate tabs and slider tabs it will go back. I have noticed these swing arm builders want to tell you what you want or what they will build. Well if they don't give me what I want will go to someone who will!

I'm an idiot! Sorry Savage420. I have never seen trailer park boys. I just looked at some clips on youtube, awesome!!!! Locogato I live in south KC.