madjimmax

I'm in next week for sure I was wondering if some one was going to hook it up good going flyhigh.

Thats one smart fucking dog

Weiscos for sure, but if I was you I would be asking my builder what he suggests.

If it was me I'd go with these Exhaust hangers

Do your self a favor and pony up the cash and let Jeff @ FAST do your port work for ya. As said earlier if your going 4mil your cylinders will need to be ported for it and if your boy hasnt told you that I wouldnt let him do shit. On 4 pokes your really only getting the head ported and a 2 stroke involves the cylinder not the head. Another question is do you have a cool head yet and if so is this dude going to cut domes for you for free also? If this dude dont port shees on a regular basis I wouldnt let him touch it. And your looking to spend at least $1200 to do a proper 4mil build. Just remember you can spend a dollar trying to save a quarter.

Oh your gonna pay like it or not. At first I felt a little sorry for you, But the more you argue the less sorry I feel. Bottom line is you hit the mans shit and split, You owe him for that and the judge will make sure you pay for it. And to all the people that says fuck the dude let his ins. take care of it. How the fuck would you feel if someone hit your shit and split, You all would be crying like little bitches and wanting to kill the fucker that did it. Would you just put that shit on your insurance or get the dumb fuck that did it. And if the culprit came and admitted it, do you think I would say well at least you admitted it so I'll pay for your mistake, FUCK NO. The only thing your going to get by fighting this is a big fat fine and maybe some points. If the cops find a dead body and you say you killed the dude I guess since the cops didnt see it they cant do shit what are you fucking crazy that is called a confession and you my friend confessed so you already admitted guilt in this case.

I'd bet that wouldn't of happened with a JDs rotor, but it does suck and I'm glad your OK.

I've bought 2 different seat covers from them both with good service. The one in my sig is from them, sorry to here you had trouble though.

Welcome to the BHQ. You've came to the right place for everything Banshee.

Looking good so far bro, Keep us updated.

Looking good bro post up some times when you got em

Looking good bro. We should get together and do some riding

I think them 310s are too small I would try to go to 320s to 330s and do a plug chop. You also might want to make sure that you have a 27.5 jet in the pilot. I you dont have them give Jeff @ FAST a call he'll have what ya need 785-364-5325

Welcome to the one and only BHQ. If you let us know what the problem is maybe someone can help you out. When you changed the pipes did you rejet? Have you done a leak down test since you put it back together?

Sure do I have a ten point cross bow and its one bad mother fucker. I've shot deer as far as 65 yards and I've broken many bolts just practicing by hitting them. As far as a scope I have an excaliber scope it has three lines in it for different yardages. Its probably the best thing that I put on the bow. I also have a red dot scope that came with it that Id be willing to get off of if you need it. I'm not really looking to get a whole lot for it I just want someone to use it, its brand new I removed it from the crossbow when I got it and replaced it with the excaliber.

Chances are that the local hardware store is not going to have what you need because of thread pitch. If I was you I would PM Nyuk, he parts out alot of banshees and chances are he might have what you need. You can also buy a complete stainless bolt kit from Alloyboltz on Ebay they cost like $115 but thats pretty much every bolt and nut for your shee. The only thing it dont include is upper aarm bolts swinger pivot bolt foot pegs and bottom motor mount bolts. I bought one along with alot of the guys on here. The only thing is if you go this route make sure you follow all directions, as far as always using antiseize or blue loctite if you dont do this the nuts and bolts will cold weld and break.

Any year Banshee is a good year. As far as problems, If you take care of her shee will take care of you. I wouldnt worry about the age to much there are alot of shees on here that are older and still running fine. It will need to be maintained and cleaned just like anything else. Congrats on the new to you shee good luck and post up some pics.

I dont know what type you have, but I have a cascade and it has 2 big washers one on each side of the bearing. And yes all that goes inside. Mine dont have a small washer under the nut either.

If your looking for bajas here you go ITP bajas . And as far as pods I dont believe they make one big one you need to run 2 just like everyone else here.

Fist thing is these pistons will run fine in a stock engine and it sounds your talking about stock carbs while to OP is talking 28pwks. And just for your info a 35 pilot in stockers are way too big stock carbs with aftermarket pipes require a 27.5 pilot and thats pretty much all aftermarket pipes. All the vitos pistons do is change the exhaust timing a little. I've ran them in my shee once and both of my sons run them in their blasters with no added heat. If you've ran them and overheated its because you wasnt jetted properly.

By no means should you toss them, it dont look like the person really took that much out of them. If I was you I would send pics to Jeff @FAST and see if he could clean them up for ya. If you think hacked up cylinders run good try a professionally ported set.

Just take this as a learning experience. And next time your thinking of doing wheelies down the road remember this and go somewhere else to play. I know that I've a quad a very long time and it still pisses me off to see some dumb ass flying up the road. I'll admit to being guilty of riding mine on the street in my hood to get to the woods, but I putt down the road and pull over and stop when a car approaches. You have to remember your not allowed to be there by law so why push it.

X2 on this, plus its nice to have your own shee and what I mean is I wouldnt want to hear aint that this person or that persons shee. Build your own and its your never someone elses.

If you want a truck to work out of and haul shit besides your shee definitely a ford If you want a comfy truck to just drive back and forth to work go with a chevy And if you want a truck for the sake of having a truck get a dodge. I'm not trying to offend anyone these are just opinions...

The exhaust and transfers were done by Ronnie Millsap