kawa110

....

Banshee prolly cheaper to ride

I’ve installed 3 as well.... 2 lined up perfect... 3rd was just like yours I rat tail filed the holes to fit....I came to resolution the steering hoop was slightly bent.

Which brand fogging oil?

If I was smart I would be... My build is on payment plan budget. Been apart too long. I’m torn between two motors... One I sent across country for 4mil... The other is stock stroke/bore, ported by Hy-tech (years ago) case matched on bench ready to be assembled.

So hot here most people remove the thermostat on the Chevy v8. Or drill 3/16th hole in them so there is a little constant flow.

I would like carb gaskets What’s up with the jugs?

Very nice, they will work. Thnx

These clamps will not work on works? Will they work on my elkas?

Reach out to sleeper06, I think he said he has slowed down on work but had a reputable place. Just pull the carbs people here will walk you through it....

Ensure floats float and dont hold liquid. Ensure float height Float needles and seat may need replaced.

Xmas money

Looking for mounts/hardware for front shock resi’s

Maybe when he is done sliding the 450 in trees...

I’ll ship You a used six pack rack for 35$ PayPal gifted You can find the radiator on eBay 45-65$ Do the led conversion from jds (ease of complete kit) Keep eyes on the swap shop and Facebook for suspension. Yes put the pancake bearing.... I have the light covers as well just ensure you don’t leave the lights on while they are covered as it will cuase the plastic protectors to melt then the cover.

Needed for those who don’t want to weld the ball to pushrod.

Maybe if I read better on the parts I bought from you I would have known I was going to get a box full of “stink bugs”

Didn’t, hence a question mark My eyesight poor

Oem ratio straight cut gears?

Pancake pusher/ceramic ball

If you want to keep them to look at. Put them in the round file.

I see a orange cut frame with j arms and another chrome frame with a arms....

Remove

RIGHT ON! Maybe interested in some suspension and that sleepr06 motor as well. I will be patient.