Fullthrottle02

Wicked's are a pretty good buy. I prefer the ball joints over the hiems as well.

exactly, 50/160 is great starting point, by buds bike with rockets like a little leaner needle as well.

Plan on heading down Thursday sometime. Just didn't know if a state camp spot would be available or if i should reserve one through LSPS.

I have never been to the dunes on an event weekend. I am planning a trip for the weekend of June 12th and just saw today where that is the weekend of Sand Jam. Is this weekend extremely busy? Will you be able to get a camp site if you don't show up till later in the week?

1) What type of aftermarket exhaust do you have? CPI Inframes 2) What type of airfilter do you have? Pods w/outerwears 3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all. D 4) What is your elevation? 1000 5) What size pilot jets are you using? 50 6) What size main jets are you using? 158 7) What temperature is your Banshee jetted for? 50-75 8) Do you have a port job? HJR Dune Port 9) What kind of carbs? Keihin 10) What size carbs? 28's 11) Air screws? 1.5 turns out 12) Needle and position? N68a on middle clip 13) Timing? +4

Sounds like you might have swapped the slides around in your carbs. Notch goes to the outside.

exactly x2

Well there is a group of us heading down that weekend, originally had it planned for the 19-21, but unforeseen circumstances have forced us to move it back one more week. Anyone one else planning on heading there that weekend? Haven't been down since October, cant wait.

I have a stock stroke dune port and i still run the 20x10x10 8 paddle haulers from when my bike was stock and its not enough. I dont know how much difference there is with staying with 8 paddles, but stepping up to 21x12x8 like suggested above. Interested in that myself. You hate to spend a couple bills on a set of tires you may or may not be happy with.

Like loco said gift it, that way no fee's. If not add the % into your price. In most cases, not all your talking about a few bucks, when i see +paypal fees i feel like the seller is nickle and diming.

I had 916 and T5's on a stock bike. Sound is definitely the first thing you notice. The DMC's came on a bit sooner and seemed to rev just as long. The T5's had a harder pull.

looks like fatty's to me, you can see the weld lines just like that on them. I had a set of fmf gnarley's back in the day that weren't stamped.

didn't know banshees could ride on clouds. I would image at that elevation you would be able to put a real small dome in it and still stay on pump gas if that's your intention. What is it, under 160 psi to still run pump gas? I don't know if you can even get to that at 10k ft.

My bike is pipe less at the moment. I just sold my T5's. Will either have CPI's or Rockets within the next few weeks. Cant decide yet.

alway up for a dune trip. heck all you guys with your cubs and strokers, I'm going to look like a 400ex riding around with you.

I have a set of Dynoport twin pipes for sale. I personally have never ran these pipes, but they say they are a mid-high pipe. I just finished cleaning them up a bit. I scuffed them up, sprayed them with adhesion promoter and VHT flame proof paint. They are flat black with a polished silencer. There are no dents, the caps on the silencers were riveted in, I have drilled those out, put brand new packing in and used screws to re-attach. I did notice that there are no o-rings in the head pipe. I will also include the left over paint i used. Pics are below, if you need some more pictures or a better pic of a certain area let me know. $130.00 shipped

Hubs sold. Still have spindles, tie-rods, and shock covers.

rub in the sunny so cal. its 20 with snow on the ground here. There you go, 2 similar bikes with exactly opposite takes on needles. Hopefully you will bolt them on and be perfectly happy with exactly what you have. My bike ran good with the JJH, it just ran better with the N68A. Enjoy the new carbs.

I run N68A, bike seems to run better with them. I believe my came with JJH needles. I have a stock stroke, dune ported motor and I'm a little fat with 50 pilots and 158 mains with needle in the middle.

This is the exact jetting a buddy has with pretty much the same mods as you, he might have a little more porting and v-force, but everything else is the same. This jetting should get ya damn close.

One of my buddies that's coming down with me has a stock stroke dune/play port from FAST that's surprising to say the least for what it is. I'm sure he'll get out there with ya.

Heck ya springer, definitely better than a tent! Gotta love sweet deals. I'll be sure to bring some pink flamingo's for ya to stick in the sand. j/k

I too have Cascades.

PM Answered

You should receive a link shortly by email to download the yamaha version, too big to email direct.