sketch2

Thats what it was man, it had a tear right by the boost bottle inlets, thanks alot guys

Yeah ill put the pilots in and see what happens, no it first didnt want to idle last week then a week down the road its not starting when cold with out throwing a lil gas in the mouth of the carbs. but when its warm it will start every time, and when i pull the choke half ways out when its warm it idles fine no prob, thats why i was wondering if its asking for more gas?

Ill check that tomarrow, but my mains are 330's and pilots are stock

Whats up guys, Hey my banshee's been acting a lil strange, it stopped idleing all of a sudden then it dosent wanna start like on a cold start with out putting a lil gas in the mouth of the carb, but when its warm it runs perfect and starts right up, so i dunno i cleaned the carbs today and its still doin the same shit, so i figured i should go to the guys on The HQ and see what u guys might think it could be, My mods are Bored 0.60 , fmf fattys with power core 2's, toomy 2 into 1 air filter, boost bottle, cool head , v force 2 reeds, and iam pretty sure my main jets are at 320's, ill have to double check and iam 2 1/2 turns out on the air crews

Iam lookin for a twist throttle with cable for my shee, i have the TORS elimination kit on now , it needs to be for 26-28 mm mikuni carbs let know shipped to 87557 thanks alot

I got a set of 21x11-10 Sand gecko paddles and chrome rims for sale or trade, the tires and rims are almost brand new and have alot of life on them still, iam asking 120 and send zip to figure out shipping, or ill trade them for a twist throttle kit for 26-28 mm mikuni carbs or shoot me an offer and well work something out

Hey guys i need a throttle cable for my 26-28 mm mikuni carbs it has to to be the 1 that elimenates The TORS system, let me know how much shipped to 87557

Hey guys Iam getting my jet kit in 2marrow from vitos and i was wondering what size do you think i should use it has the stock carbs and it has 200's in it. but i have a fresh bore on stock cylinders of 0.60 and has wiseco pistons, boost bottle, toomey 2>1 filter kit, fmf fattys with power core 2's, and my elevation is at 6,969 ft

My brother said he runs a 24:1, but i just built my motor and its bored 0.60 over, with fmf fattys power core 2's, boost bottle, what do u think would be the best for that?

Hey guys just curious on what fuel/oil mixture i should use, iam using 4 oz of yamalube per gallon of gas

Alright thanks guys for all the good feedback and info, helped out alot

no of course i didnt put it on dry, i used MTL fluid, 80 wt. I think ill just stick with it its done pretty good, in the past with my banshee.

Hey man its sketch2, thanks for the crank came in perfect condition, helped out alot on the shee.

i was using some shit that used to give me at the local bike shop, but now they shut down, Theres nothing in the trans or motor, i just put in a new crank in today, so i had the cases split and everything was cleaned, so you think trans fluid works good, because some friends were sayin that they use 10/30 motor oil, but i just wanna get a second opinion on what every 1 likes to use

Hey guys quick question what weight of oil is recommended for the motor/ trans dont they say 10w30 is?