Holyman

Let's see the finished product!!!

How much is reasonable? Do you need the rims too? Got any trades?

People that leave negative feedbacks just for waiting should be dragged behind a banshee that runs old jock strap sweat for premix.

I doubt it. My research has shown them both to be about equal. You certainly won't get 20% more from the Trinity than the Graydon.

they are the best. it takes less than 2 minutes to pop off the tire with no rim or tire damage. they are expensive but 1 wrecked tire is worth the cost

dependson the fitting. The one on the axle I used a 1/4" bit and you just put a 1/4" socket over the grease zirk and hit it a couple times with a hammer. The angled one is threaded with a 14-28 tap. In that case, you use the drill size stated on the tap.

Use the figures Playnsand gaveand the figure your Yamalube.The Amsoil is usually about the same price as Yamalube and You mix at higher ratios. So it's even cheaper.

Thanks Play... I can get you whatever you need. I was helped to figure out how to get the stuff shipped directly to you guys without paying to ship to me first. I suggest you click the link previously mentioned. There's tons of good info. I run at 80:1 with no problems at all. I used to run Yamalube at 32:1 and then 40:1. At 80:1 with the Amsoil I have no worries. I know Deuce runs at near 100:1 and some other guys run up there too. Do a search on Amsoil. You'll see.

Sorry to hear about your terrible loss. He sounds like a great guy that we all wish we could have known. Take the best he gave you and do the same for someone else. Keep payin' it forward.

http://www.bansheehq.com/forums/index.php?showtopic=17725 and... http://www.bansheehq.com/forums/index.php?showtopic=11091

bump

bump

That's retarded. Does anyone know what happened to thelink of the site where you're in the jungle and gay guys run out at you and you have a shotgun?

Yep just a 1/4" hole. Make sure you clean out all the shavings before you put it all back together. If you need A arm or swingarm pivot bearings, let me know. I'll hook you up.

I can get you the axle bearings but the guys on ebay are giving 'em away so cheap, I can't come close to buying 'em for what they're selling 'em for.

I've got a few pairs. I'd consider trades. Email me... [email protected]

I've got a pair of NEW Mikuni 35MM round slides and a 2:1 intake. Email me if you want pics or more details... [email protected]

That's right formula weed... keep 'em on the right road.

I drilled a 1/4" hole in the inner sleeve too. Just to make sure the axle or the pivot bolt will come out later.

Got pics?

pivot zirk

carrier...

Thanks Nyuk. I do sell the A arm and swingarm bearings and take $15 off the eBay price for the A/J arm sets.

Make sure your plug wires are water proof before you go crazy and get rid of the 2:1 filter. They're the first things to get wet and cause a temp bog.

I have shocks... What's the paint ball gun like? How much cash they worth to you?