robert0762

I am running pc's with my 4 mill setup and it rips

You notice any diff in running those cages

What year are the shocks? Please send pics of shocks and brake lines to [email protected]

Sounds rich to me. I am ported no lid k&n and a 4 mill at sea level pc pipes and I am at 45 pilots and 145 mains n68a needle middle clip

I had very slight deto in one cyl due to a leaking o-ring. I did not hear ne thing but it back the plug out really quick.

You don't need plus 4 timing but its a great mod for cheap. Really wakes up the mid range

I'm sure some have seen this on another site but for those who have not here it is. 2 Stroke Theory

I run a chariot . Very nice quality part. Have had no issues with leaks and it diverts water down and around the cylinders wich not all do

I would double check all wiring for continuity. This includes making sure you have good grounds.

Def sounds like an air leak.

Could be stuck. Also could need new needle and seat valve. Hit up a site sponser for the rebuild kit

so i should run a synthetic blended for pv? What oils are available for this?

Is it ok to run caster in a PV motor?

I'll go 100 shipped . PM me if you want it

I ride mostly trails and love my hd's but the only thing is they wear very quickly . i dont touch asphalt much either. I do hit the tracks a lot so i guess the rocks are hard on them.

thats the only pics I got ritenow. When i bought the bike it had a hole cut in the fender and a old gauge that bdidnt work. so i bought a new one from advanca auto 16 bucks and teed it into the return line. It eorked very well for me and it has a light wich i just ran of my headlight, worked great. on my new ones i aint want to put a hole in my plastics so i mounted it in the airbox

ttt

70 plus shipping

what would the deck height be on some stock cyls

i have a 4 mill stock cyl . 64.50 bore, ex port is 28 mm below deck. And i am running 23 cc domes corrected (i think thats the rite word)

Well i have some that i got with some other parts and was thinkin bou runnin them when i go to the mx track

I currently have a 4 mill mx port with pc pipes boyesen dual stage reeds 28 pwks and a k &N with no lid. If i run pods will io get any more power and if so where in the power band. My setup is not top end so i dont know if it will benifit me

What is the formula for figuring my compression ratio

Heat of the piston chars the oil as it comes into contact. Areas where piston is cooler i.e. intake areas the oil does not char. Thats what I thought happened. But you are telling me that the exhaust side will burn it off? Do you think i can lean out a little. I think I can but just want a second opinion. It feels good when i ride but I think it can go just a tad leaner to be perfect . Also plugs are black

Also it looks like the piston is hottest rite at the intake side . From most of the info I have found this is backwards correct???