sheeforever

Hi every one , i am in need of a new set of skat trak haulers 22'' tall 9'' wheel '' pref 7 or 8 paddle i busted off 2 paddles on my last run , they were in bad shape anyway . i am heading down to Winchester bay Oregon for the 4th let me know what you got thanks Aaron

thanks guys don't really know how to use the sight yet, but getting there

so what do you think of 2 into 1 ?

the carbs i have , got 340 main and 50 pilot is that ok for pilot ?

what do you think of 2 into 1 carb set up ?

so i will get more performance out of 28-30mm carbs thanks Fast you have been a great help!!! Aaron

thanks for your help will the 34s work fine or are really not the right carb at all i have them with intake and pods didn't pay any thing got them from a friend , my stock carbs are in bad condition the threads on the slide caps are stripped and need to be replaced it has a noss cool head and im going to put 19cc domes in and run race gas , i run 50/50 now

ok cool so when would i need to go to 34mm carbs ? what determines going to a bigger carb and what are pods thx

no help ? am i in the wrong forum ?

hi do you still have the timing plate?

hi guys, i have some carb and jetting questions , i have been reading your posts and y'all have a tone of experience and good advice . my questions are , well lets start with this i have the stock carb in my quad and i have some Mikuni 34mm flat slide that i want to put in engine has dune port stock bore -vforce 3 - cool head 21cc 155 comp- t5 pipes - k&n filter stock carbs -main jet 290 -pilot 25 i want to install the mikuni 34mm where should i start for my jets and air screw also what will my gains be ? is it worth it do i need +4 timing ? thank you for any help