banshee_terror_

not really thow it caust allot more for the excavator than i payed for the dirt. i got it for like 35 bucks for 15truck beds full. and it pritty easy to make a jump out of a pile of dirt

i had an rm were i could fit a piese of paper between the cyl and ring cleanly never did a compresion test so couldnt tell u the numbers but for some reson i could still pull wheelies in last gear. i built the shit out of that bike but i think you should be fine people run there bikes on 90 pounds of compression and still ride it long and hard.

i like this one if the headlights and wheels were white like that other dudes

umm never with any bull dozers or escavaters. i just bought dirt and had them dump it in a spot and smothened it into a jump. but for turns i just whipped around them and it slowwly built up banks. but wet it often when you ride it dirt gets flying every were and it gets pritty nasty expesually in tight tracks.

This may seem stupid but mine broke rate before the threads. So I took a punch or a little pic and started spining it out like that I also took a flat headed screw driver and put it in there and hit it with a hammer a few times to give it a little groove and just unscrewed it and after I got it out enough I threw vise gripps on it and pulled it all the way out. Hey it worked and I didn't damage anything. But I was gana do the same thing take it off and drill it from the back but I did it my way first and it worked fine

so while you were out on vacation they used your truck and whent for a joy ride and fucked your shit up. and they stole your raptor. wow id be pissed. i would honestly kick her door down and be like were the fuck is my shit and fix my fucking truck.

not a bad idea. but pics of your work would really give you a yes or no anwser

does any body know how long pills last in your system. or even if you could trace them threw a drug test. im talking about perks volume oxycodine oxycotten zanax and seriquill.

get the v2 race black or the v2 race red or something. i dont like the one that pops up when you open the page

its looking goold______it is a mixture of the two good things. im trying a new word out. its gold and good together

umm your good id rebuild at 90 or like a 7psi or so diffrence but ak is right it depends on how you did the test and with what tester

i agree with you 100 percent. i do the same shit beat the hell out of my toys. i destroyed my shee. thats why im rebuilding the motor throwing on some new paint and getting the frame welded in three places. i was just saying that it looked beat and it could use like a tear down and rebuild or a good power wash. but it sounded good in the clip

or you rip the gas line off and turn it on resurve. let it drip out that way. also drain the carbs of any bad gas and while your at it clean them

are your spark plugs gaped right? the coil might be bad

i just sealed around the whole cases with some permitex. i cleaned were im going to be silaconing up with rubbing alchol first also just because i didnt specify were i put the silicone. i put it on every spot were the cases touch

not going to lie that thing looks beat. post up some new pics

welded crank and billet impelor

i wana c a vid of the bike running and like above pics of the build

i have the 4 by 10 rims. i cnt get the tires off thow they have hoosier slicks on them. im liking the swing arm what color pc is it other than green like candy green. and the boots if there brand new

yah well the pictures craped out and my phone still wont link up. but im talking about the two things on top of the motor by the bake mount on the top case. one whole is like a half an inch diamiter and the other is like a qourter inch diamiter whole. also on the inside of the motor or the clutch side. rate on top of the starter gear there is another hole with about a half in diamiter and another 2 holes with a qourter inch diamiter. im explainiing it kinda confusing but if i had the pics it would be allot easier to show and explain

take the plastics of it makes it easier. and if there is wires in the way unplug them if u can or pull them put of the way when you weld the frame but make sure nothing is tucking the pipe your welding because it will get hot and melt

i just figured how to use the site picture upload and im gana try it next time. but i whent to sinc up my phone to download the pics but it didnt detect my phone so im gana try and work on that but i sent a guy the pics threw email and he said he would put them up some time tonight if i dont do it first

and this is where you come in and give me your email so i can send you the pics so you can post them

a boost bottel jk

i love your bike no dout but i think if you had diffrent rear tires it would compliment the look a little better