banshee_terror_

anybody

Why did the chiken cross the road? To ride the banshee

i want in

call a lawyer and ask questions..

yah i wana see a picture. and how much did you pick it up for

there should be an arrow on top of the piston. that is sapose to point to the exhoust. the rings if you look carfully on the pistons were the rings are sapose to go there should be a little pins the gap were the rings are apart are sapose to go there. i cant help you much with the reads i didnt read that part that much

stock head sold

that sucks i wish there was a video

adjust the front end. but its normall that the wheels turn when you hit a rock or stump just be strong and controle the bike but adjust the tie rode

like both tires and you loose the handle bars at the same time or your handle bars are straight and the wheels do that. but if its something else your shit is f-ed up

if your getting a 4mill you need port mached cyls cut domes. you can also geat bigger carbs better reeds trued welded crank longer swinger better saspension and w/e

need this stuff gone asap ill except offers

oops i didnt mean to make you go stroker like me. i did the same thing my original post was some what the same good luck. ebay is the way to go.

sense when do you not use a head gasket with a cool head. i must of missed that. and to go stroker you have to cut your domes no matter what brand name you go with if im correct. cool heads are realy nice because you could change your domes any time you want instead of keeping the same one with a milled head. also its another aftermarket piece you could say you have. it also adds a nice look

still have everything and the prices are resonable. 400 for the juggs and pistons and piston hardware. there on a fresh bore no hours on them and pistons are brand new. 195 for the crank with max of 9 hours on it. 20 for the stock head 25 for the 17cc domes i can send pictures just need an email

there are allot of peaple on here with noss heads. i have a prodesign head for domes??? for pipes cpi's definataly if your doing port work timing advace +4 is plenty +5 would be nice for the race gas if im correct. but you may whana invest in other things like a nice set of tires shoot even go stroker but bigger barbs or bore out your stockers and a nice set of reeeds vf3's

i had ayz250 that did that except im pritty sure it was a rod nock

yah but here from the same persion

im just saying if you knew anything seeing how you have a 10mill you would know something about a stroker but you dont. ive only had my shee for like 6 months and know more than you about a stroker when i have a stock stroke bike.

and i just wana say how do you not know this when your 2009 banshee sounds so nasty. i just hate peaple like that. no offense but peaple who have nasty shit and dont know what it is about or does or any of that anoyes me.

you cant tell because you have an aftermarket head with aftermarket removable domes. wich means the domes could be cut for the pistons to slide in side them. that way you wouldnt have the spacer plate and couldnt see the domes unless you cracked the motor open or just took the head off

if you want pics just send me your email

also have a new paint ball gun i just let it sit with no oil in it and the seals whent bad by the cocking mecanism. there like 3 bucks but i dont play with paintball guns so i dont car about it much that comes with 2 tanks both empty and 3 barrels one carbon fiber and the other 2 came with the gun ones short and the others long

i have an rc car. its an rc10. with an aftermarket os engine and suspension and shocks i was running it yesterday. if your intrested it comes with another complete set of sevose and controller

Yah not trying 2 b a dick but what kinda trades are u looking for