01banch

You are Correct!

I have ran the Ebay swingarm for 3 years no problems, But Stellar is gonna be choice for my next swingarm. so x2 on stellar.

Try them both and make your decision based on which you like the most.

Im gonna weigh in on it. I just had to remove the studs from a cylinder and I have to say that is a pain in the ass and would make it not worth the 2 piece ever. The pro design are well built but I would run the noss or any other one piece head before I remove the studs again.

I think 35's should be plenty big enough unless you are planning a all out drag build.

I Run 40:1 but I know people here in Oregon who have been running Redline @ 100:1 for a few years on the same motor. But I would try 40-50 to be safe.

gearing is your problem. You are geared to tall to pull 6th gear like you think it should pull.

Bump-- lowering price to 300 shipped on the whole thing or 150 for the head w/ everything you need to run it including studs, 150 for the cylinders and pistons w/ out studs. all of this is obo and trades will be looked at. Paypal address is [email protected].

I hope you were not talking to me I have raced one a few hundred times. The only person I ride with has one. Nice bike but not what I would call a reliable machine.

ttt

Looking for the stock gear in good shape I stripped a few teeth of of mine so it needs replacing.

THE QUADZILLA FASTEST PRODUCTION QUAD also the most unreliable quad ever produced....forgot to mention that.

it takes one asshole like this to make it harder for new sellers to even sell anything.

pm sent. also the cylinders have the pro design studs ill see if i can find the right length ones for you before i send it out if you want.

ttt...will trade for intakes for 34mm carbs,a lockout, reeds, throttle cable,and anything that will help make my cub bullet proof. =)

You have a PM. as soon as you get back to me with a paypal Ill get you some money for the pancake bearing.

I have a set of stock cylinders with pistons and a cool head w/ 20cc domes. Running 120 and 118 psi when i pulled em apart. Ports are stock and cylinder sleeves have no scratches and look good. Piston crowns are black from being ran a while. Both head and cylinders are in pretty good shape. Cool head has all the O rings and domes look good with no pits or roughness. Looking to sell as a package (because of the pro design studs in the cylinders) but may seperate. 350 shipped.

it was mildly ported w/ pipes and pod k and n.

it is dirty lol, but looks alright.

I do still have it. message me and we can hopefully work something out.

I pulled it apart today and have some detailed pictures. Please let me know if you have any questions.

this is what i know. I bought it off a member here, he said it was a graydon proline, I traded for it and now i want to go back to duels for a bigger motor. I had to do a bunch of jetting and needle changes to get it correct and have done so, I will throw in the "stock" needle that came with it as well as the one i bought, ill throw in a brand new throttle cable and thumb throttle as well as a k+n that is on it with a outerwear. for 150 shipped.

what is that supposed to mean?

could be a bent wheel as well. Grab the frame were the grab bar connects and try to wiggle left to right while watching bearings if you get alot of play side to side bearings are bad.

try kicking it over slowly three times before actually trying to start it.