boneyardbanshee.

Just installed my LSR today and I like it alot. Very beefy, and the chrome is awsome. had a few issues however. It was very tight on the carrier wich may have been from the new bearings. Also I am running all Boss hubs and the wheel hubs will NOT slide on far enough without shortening one of the spacers about 1/4". Wasnt a big deal however. I bought mine for 320 shipped through ATV Galaxy on Ebay. That is the lowest I could find them. They just had a sale for 308 shipped I think.

Can you disengage your clutch? If not you might have welded your ball to the pushrod in your clutch assembly.

there can be a difference in overall lenth of the stinger also. Any Toomey should be fine. As far as others if they are longer you can just give them a trim. However I bet you can find a cheap set of silencers on ebay.

As for the TORS just unplug them untill you can get a kit to replace them.

The wire off your clutch lever has nothing to do with the TORS. That is your e-brake cable and to eliminate it you just remove the cable and get a block off plate for the rear caliper. You can also find a bolt that can plug the caliper but a block off plate is best and you can find one on ebay for like ten bucks.

did you check to see if they are the same size and ply rating? Guess it doesnt matter though cause that is obviously not right. Back ordered till July? Thats shitty. I would ask for a refund unless you can make due till then. Their back order shit changes alot back and forth on alot of things.

damn those look beefy. Have you got a ride in yet. I sure wish it would dry up a bit.

I just had this happen about a month ago. For me, the splines on my hub were gone. I was only turning one tire. I only noticed it on the road though.

pm sent on handgaurds

have the same problem with mine. With just the one, it is still solid. Overall mine fit like shit.

I have one from Casscade. It really helps with fatigue. If you ride alot of mud it can get slick but yeah, I like mine alot.

I am sure they make something for this. They have wrenches for the anodized collars for nitrous hookups so you would think they have some kind of socket. Only thing is you wouldnt have the torque on the nitrous lines that you would have on the wheel bolts. If not you could try some electrical tape and make sure to use thread locker. Maybe check with Summit :shrug:

Yeah I was looking at them but they are a little out of my price range. I already have about 210 in hubs (wich is a steal) and I think the LSR will be just fine for how I ride. I dont jump alot. I snaped my stock axle on a drop off at the local gravel pit. I still have alot of other parts that are on my list and riding season is upon us. Didn't plan on spending a shit load on a new rear end but if I am going to replace it, I want to do it right. Anyhow, so far I found a LSR axle for 320 shipped. And was looking at Modquad or Boss locknuts. I dont need the hardware to be polished or anything because I will be laying powder on them. I just dont want to have to do this again for a long, long time.

So Rocky Mountain wont have G-Force axles untill June 26 and I have a big ride on that weekend. I guess I will be getting the LSR axle now instead. I was wondering if anyone knew a good place to buy one. Do they have different models or are they all the Axcaliber? I also have all new Boss hubs so they will fit on it right? Guess I will need a locknut also, any brand you guys like?

they are covered for life against bending and breaking.

not sure. I am in the same boat as you. I have been searching all over the net to find one and looking for alternatives. I ran across Raptorforum and they were talking about using a banshee axle and how it would work but would be offset by 3/4 in. or so. Not sure if if was a 660 or 700. The earliest I know of anyone getting the banshee axle in is mid May. Sucks because I have all new Boss hubs but no axle. The only places I know that sells the axle is Rocky Mountain or on ebay. Still searching though.

raptor axle will be slightly offset

nope didnt see that good call

pic of front bumper

Wow dude glad that worked out for you, I seen a bunch of his crap on there also. Got to watch out sometimes, my brother lost over 3 grand on a crotch rocket. He never recoverd any of it.

haha now thats funny, and an option also.

it depends on how much and how good the shit is. Marijuana CAN stay in the system for two months. It also depends on your body fat percentage. You should be okay. If you would like to take perventative measures go to WAL_MART and get some SUR_GEL. It is used to make jello. Drink a tall glass of it mixed with cold water about 6 hours before your test. This will take the bad things out of the urinary track in solidify it so that it passes thruough the bowls instead.

very nice job man. Love the yellow trim, not too over done. That seat is cool also.

50:1 on Amsoil Dominator is fine. Many people use it at that ratio for years with no problem including myself. Change your exhaust rings. If your bike runs good your jetting should be close.

only difference is the arms.