gst_r

Hi man! i am pretty sure that 32:1 mix ratio is like 4oz per gallon, so if you have 5 gallons at that ratio you will need 4 oz. more....20oz to 5gal...

i bought mine on walmart cost me 15 dlls plus 2 dlls for the 35w lights.....on my signature you can see them,,,

looks great, nice color! what color is it by the way?

stock sprockets on the last models of banshee are 14/41.....

i cut the stock mounts, then just drill a hole to use the mount of the lights....also find another bulbs the bulbs on the lights are 50w.....you will need some 35w....of course this is if you are using stock stator

uhmm the bike was running great, i guess was the fear lol....there was too much whoops...and the guy on the 4mm had already fallen.....

the carbs looks like Pwk airstrikers...so they are 35mm pwk airstrikers...!!

Bump!

yes you can....!!

Just to give you an idea, my mods are: - Drag/Full port - Ported Cases - Stock reeds - +4 timing - Milled head and at sea level on my 34 PJ i am running 160 mains, clip on the last clip (richest position), 55 pilots (maybe running too rich)..... maybe this help you....

PM Sent

Sure i would do....here is a vid from the bike vs a 10mm twister....my buddy could not keep the front on the ground....4mm Twister... and over here is another video vs a 14mm cheetah on the track....vs 14 cheetah

the bike was running 4.00 before new pistons....he will take it to the track friday and i will update the time....

For sale 4mm Twister on Cromoly Hillshooter Frame This bike is from a friend, so i am helping him with the sale, he wants to take a break Description of the bike: - 4mm Twister 76mm Bore (new pistons with few passes on the track and like 2 weekends on the dunes) - 2-5 override - Direct drive lock up and quick change cover - PVL Ignition - 38 PWK on alky bored to 41 with K&N Pods - Pingel Valve - JJ&A Axle - 14 Haulers Kevlars on blue labels - Front Smoothies tires on Spindles mounts blue labels - Cromoly Hillshooter frame, recently painted on purple metallic - Cromoly +14 no link swingarm with mounts for wheelie bar... - Cromoly a-arms - All 3 Marvin Shaws shocks - Same side Big bore shearers pipes - Fullbore purple plastics. Engine work done by Podos Racing... PM for questions or detailed pic, or videos.... Price is 7,500 negotiable....looking also for a trades like a nice 4 stroke bike plus cash o for a nice truck, etc..

you need the packing on your silencers as matter of fact you should check it and if it is bad you need to put new pack on them.......this is because you need smoe kind of back pressure if not you will loose power.....i am not expert but if you read some articles about 2 stroke exhaust will give you an idea......

yeahh of course is posible......check out here for some examples on some engines displacement....Cheetah...or just play with the values and realize what kind of bore and stroke will you need to get 526....CC Calculator...

a friend mine had an issue like yours......he pulled the cylinders and notice that the "port" job was not correctly polished......he send the cylinders to a real guy and problem solved.....

I like the sound of my Cut T3 Pipes.....Shearers Inframe sounds cool....but about loudest i guess any Out of frame...

thanks man! i put 160 mains it runs better, also check the pick up coil gap.....the only remaining thing is that on idle my spark plugs are getting wet a lot.....i guess i will try some 52 pilots instead of 55 or maybe lower...what you think?

will be there! 1st time on glamis hope it will be great!

Hi guys....well right now i have an issue with my banshee, it was running perfect then i had a issue with the tranny i get it fixed and also my cases port matched but know when running on wot it just seems to on some kind of rpm limiter this only happens when i am going wot, as soon as i push the throttle, i check for spark plugs, spark, my carbs are clean, from idle to mid throttle seems to run great.... my current jetting is 140 main, 55 pilot, clip on middle, my carbs are 34 PJ, running a mix ratio of 32:1 (4oz per gallon), sea level, right now the temp is 60 to 70F.. it is drag ported, milled head, +4 timing, lightened flywheel... can you help me on what else i can check or look for? or maybe i am off on my jetting... PS. By the way what will be the correct gap for the spark plugs...

Hi, 32:1 mix ratio is equal to add 4 oz. of oil per each galon of gas 40:1 is equal to add around 3 oz. of oil per each galon of gas here you can find a gas oil mix calculator.... Gas Oil Mix

pm sent

ohhh ok ok sorry i understood wrong, i will let you know the size just let me measure it i dont remember it....they were set up by podos racing....

they are drilled to allow the flow of alky.... any offers?