gst_r

yeap, i still have them...pm sent...

He wants a set of rear hubs from the old banshee pattern, this are from banshees of 1987 to 1991....try ebay i saw many sets....

i was thinking to run a mix of 50/50 of 110 race gas and 91 premium fuel this will be like 100 octane...but my fresh build have 130psi of compression and my timing is +4..after reading this i guess i should be fine just running premium fuel or can i gain some power running race fuel mixed with 91..??

i guess he wanna know if you have any port work on your engine...also if you have a longer swingarm than stock...

if i am not wrong the 795 series are used on long rod cranks....and/or stroker....the 513 are used on stock stroke....

i have a set of Cut T3....a friend of mine have also a set of T3 on his 4mil....i cannot complain...they sound great and yeap haul ass...they are a good sleeper drag pipe....they are top powerband pipes...

x2 on this..!!

so i guess it will be better to run some 100 octane fuel....i have 130psi of compression and +4 timing...do you thinks guys if i will be able to burn a mix of 50/50 (110 racing fuel and 91 premium)?....thanks for all your responses...

Hi guys! I saw this fuel at the Shell station, i look over the internet and it says that: "Shell V-Power is the most advanced fuel Shell has ever developed-a high-octane, nitrogen enriched premium gasoline that actively cleans while you drive to help improve engine performance." will this nitrogen enriched fuel harm my engine? will i get any gains from running this fuel? thanks... Shell V Power

i have almost the same mods like you and almost the same kind of paddles......i tried paddles from a friend and they hook up better...so i will tell you that you can try some 22x11x8 tires with 10 paddles.....

well, we don't changed the reeds since my friend is little bit skeptical that with little chips causes the bike to bog, the compression was tested and 140 on each cylinder...i guess we are going to try the reeds and check the stator...any other advice? thanks

thanks guys i guess we will try this afternoon to put another reeds....and see how it performs...

cool place el golfo....my sig picture is from there....about YFZ 450 i beat some with many mods....but with your mods i guess it will be no trouble....

Hi, well after many solutions my friend cannot find what the hell is going wrong with his banshee.....it is a 4mm on gas.....it is weird....example if he closes the petcock......the bike runs fine until the carbs runs out of fuel.......but with the petcock open the bike just bogs....like a rich condition but...the bike was just running great.....so he pulled away the carbs, intakes and vforce....he found that 2 petals...one of each side have small chips....but are only like 4 or 5 on each petal.....can be this his trouble??? he is running stock carbs....

At dunes i was beating a quadzilla! even with the spinning at the launch due to my small paddles.....the quadzilla had a out of frame pipe, better paddles and was that kind of drivers that if he is not the first that launches he will stay at the launch spot...lol...even with this i was beating him, i beat him like 7 of 10...so i guess no problem with a quadzilla...

i use B8ES and work fine for me, the BR8ES i have read that have resistor this to avoid interference with electronic stuff.....

Looking for a set of rear douglas rims .125 8x8 banshee pattern, good condition...price with ship to 92231, thanks

any offers? any trades?...

Hi man, how much will you like for them shipped to 92231!? Do you think that with my mods they will hook up? thanks....!!!

yeap, on 33, 34 and 35 is the same size and mine are 2 1/4...and sorry the link is this Sudco

If i am not wrong you need a 2 1/4 size filter...http://www.sudco.com/knca.html over here look for YAMAHA ATV and at flange dimension is the size of the filter...

Hi! Here to ask if this port make any gains....i have a friend with this mod he said me that the difference is not huge from drag port but it has better performance, so i am here asking yo you guys....i currently have Full/Drag port....so triple exhaust port will be an improvement on my bike? and my friend told me that when he get this mod....he also needed to run a lock up because his clutch was starting to slip....will i need this mod also?...any other comments for another mods are welcome....thanks...

...200 shipped...to the lower 48 US

Please pics from PWK 35, Boss Intake and Filters to [email protected], thanks!

A friend mine was looking for a PVL, please send me pics from it to [email protected], thanks