gst_r

PM Sent on PWK 35!

dumb tube is the tube at the bottom of the carb, where the hose of the power jet is attached, it must be drilled....someone correct me if i am wrong...

alright thanks, so i should adjust the cable and the slide should go up all the way when i push to the full throttle position...???

I was cleaning my PJ, them after i installed again, i push the thumb throttle to the "full" position and i notice that the slide doesn't go up all the way, is this expected or my cable is not corrected ajusted and the slide must go up all the way, thanks for looking... Here is a pic when i am pushing to the full position, notice that the slide doesnt go up all the way Here is my throttle and here is the cap of my carb

Thanks for the advice, i hear the same opinions about this pipes...i love the sound and how my pipes pulls on the top....maybe in a future when building a 4mil i will try CPI or Shearer...

so do you think that if i change my pipes on my stock cylinders drag ported i will have more performance? i was skeptical on changing my Cut T3 pipes.....but if i will have more power i think i will try them...

$ 200 plus shipping..or OBO...

any offers?

Bump

I run Klotz Super Techniplate, a friend mine runs Redline...i will be trying redline next month i guess...

Keihin PJ 34mm Alcohol Carbs, running great..!! they are from a friend, he change to another set up so no needing this anymore...here are the pics, any questions let me know....asking 250 shipped, thanks.. Here are some pics from the carbs on the banshee:

PM Sent

1) What type of aftermarket exhaust do you have? Cut T3 Pipes 2) What type of airfilter do you have? K&N Pods 3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all No box 4) What is your elevation? (If you don't know, go here: http://www.topozone.com ) At Sea level 5) What size pilot jets are you using? 38 6) What size main jets are you using? 140 7) What temperature is your Banshee jetted for? 50-90 8) Do you have a port job? Drag/Full Port 9) What kind of carbs? Keihin PJ 10) What size carbs? 34mm

How much for the paddles shipped to 92231..thanks!

as far i know yeap the same, only the hubs from old banshee are 4x156...but if it is the axle and carrier no problem to fit your swingarm...

i will check my pressure...but how is the lowest and safest level that i can run on them?

I'm using Klotz Super Techniplate and works and smell cool....a friend recommend me to use Redline oil...i will give a try next month i guess....also i have heard good comments about benol...

thats just sucks!!! i expect that you have it back soon! i put a big chain and a big lock on my banshee since a raptor was stolen to my neighborhood...!!

Hi guys! i will like to hear opinions from people with more experience...this is about the correct paddles i should have, right now i have 20x10x10 9 haulers paddles, the paddles are almost brand new so they are hard, they hook great when i am duning but when i am dragging (drag i mean drag along the dune so i guess the correct concept is hillshooting) they spunn a lot at the start, i guess i need to have less air on the tire, i bought this paddles from 30 dlls each one so i will like to keep them as spare...so i guess i will need to save and bought a bigger paddle...a friend of mine used to have same mods and he was running 22x11x8 12 hauler paddles...do you think that if i look for a similiar set up my bike will hook up better? i am only 125 lbs weight, the most of the time will be hillshooting and sometimes will be at the flat drag..what do you think guys about what size will be the better set up...thanks! and sorry for the hugeee post !! my mods are on my signature

Hi, im running T3 Pipes with the silencer from the T5 pipes....i bought them as a complete set but at the page of Toomey Racing (power brokerz) they sell the silencers brand new...also i have seen set of silencers at the For Sale section...

i get some hubs locally...thanks

Hi, i need some rear hubs from old banshee pattern.....i never check that my paddles have rims from these size...thanks...

Check this site, i hope this help !! Carrier

Great guy, bought a set of carbs from HIM...and they are great.....he even wait me to sell my stuff....great communication, fast ship....thanks man!

What about the intakes that are for use without crossover? i search and the info is that i will have a shit low end power and also problems for starting, so will i have problems for running this kind of intakes on a PJ 34? thanks!