Jump to content

TIM LUTZ

Members
 View Profile  See their activity

  • Posts

    298

  • Joined

  • Last visited

 Content Type 

Everything posted by TIM LUTZ

  1. TIM LUTZ
    What is the lowest you will go on the clutch basket?
  2. TIM LUTZ
    How much for the billet sprocket hub and the VF2s
  3. TIM LUTZ
    Rear caliper?
  4. TIM LUTZ
    Got a good rear caliper?
  5. TIM LUTZ
    PM sent on basket
  6. TIM LUTZ

    Rear Caliper

    TIM LUTZ posted a topic in Wanted

    Looking for a good rear caliper. Make sure it's not froze up on the floating pins like mine.
  7. TIM LUTZ
    Anyone run the Vito's dual pedal reeds? Look a lot like the Boyesen power reeds but a lot cheaper.
  8. TIM LUTZ
    How much for the rear caliper?
  9. TIM LUTZ
    pictures? How are the reeds?
  10. TIM LUTZ
    If it's stock, it's just a key
  11. TIM LUTZ
    Did you like the TDR reeds? I just did a comperssion check yesterday. 150/151 Anyone run the Chariot cages?
  12. TIM LUTZ
    So the 2 and 4 series are better than the 3?
  13. TIM LUTZ
    I'm running the dual stage Boyesens now but after 10 years they have to be worn out.
  14. TIM LUTZ
    Hey all, What's the vote for the best replacement reeds for stock cages. Looking for bottom end. See my sig for mods. How much better would a set of VF3's be for torque with my setup? Racing XC, GP and HS. Thanks
  15. TIM LUTZ
    How much for the rear caliper?
  16. TIM LUTZ
    2" longer and it will turn worse than it does now. I run a 1.5" shorter arm. Seems to be the hot ticket for MX/XC and it's not as bad on hills as you would think.
  17. TIM LUTZ
    Running them for 12 years and love them. Everything posted above is True. Nice wide power band. Take mods verry well. Sound like no other.
  18. TIM LUTZ
    MSR Pro Raptor clutch lever assembly and a Motion Pro armor cable works well with heavy clutch springs.
  19. TIM LUTZ
    Got a good rear caliper?
  20. TIM LUTZ
    Got a good rear caliper?
  21. TIM LUTZ
    Have a brand x round housing carrier with a stock diameter axle. Am I correct that these usually take four 6007 2RS 35 x 62 x 14 bearings and OE Yamaha seals?
  22. TIM LUTZ
    YFZ450 front calipers are suppose to bolt right up.
  23. TIM LUTZ
    Good info. Thanks guys.
  24. TIM LUTZ
    Tim, is that 450r or 400ex?
  25. TIM LUTZ
    Try it or sell it to me. I have heard that it is the cadillac of the thumb throttles.

BHQ Quick Links

×
×
  • Create New...