350BANSHEE350

i ride trails and i want to put a 13 tooth front sprocket on ... how much work does it take and what d you hav to do etc. thanks

is yamalube good? what should i mix it at? im guessing 32:1

Calgary , Alberta

how tight should the hoses going to the motor from the rad be ... i just tightend my so the rubber popped out about 1.5 - 2 mm max. from the metal ring is that too much? how much does it take to over squeeze the rubber tell it peels or cracks? i dont want to wreck my hose

i think m going to take that crap ack to the stealership and get some maxima 927 thanks for help fellas

i posted up a thread about the optima 2 and i dont think im going to use it so ill take it back check out the oils o this page and tell me which would be best to run http://www.partscanada.ca/catalogue/2007/atv/en/index.html i think the castor 927 is best thanks

hey all i just picked up my first oil for the shee its optima-2 its smokeless and synthetic have you heard anything about this oil thanks alot p.s ima get some pics up soon

how muc for red stock front grill?

dude smoke that cocky dick and waste him get it on tape too i need a good laugh once you beat him bad he well pull up the excuse of being in the gravel and tell him to race on the rode with you and then waste his ass again and again and agian dont forget to tape it :geek:

yea man go with the banshee rebuild it and buy some used pipes and be way faster then te raptor if you go with the banshee and rebuild it and pipeit/jet it you well only have spent like 2300 max

would it be better to run premium gas with klotz supertechniplate? is premium gas better to use?

whats the full name of klotz that you use if you understand what im saying?

its a stock 07 banshee... so when you go up every 2000 ft you go up one size in main jet? what size is the stock main jet? thanks

.

would i need to rejet going for these elevatins? 3500-7000ft (both between 20-30 degrees celcius) if so what would be a good jetting for something in between those elevations (mainly at 7000ft) so something like 5500ft or 6000ft, same temperature as above (stock banshee) thanks alot guys

yo i don't even know where pismo is! but i got my sig down long live riding

i dot want to tak over your thread... but im just wondering what elevation differences should you change at? EX. 3500 ft to 7000ft both at 20 degrees celcius would i have to rejet there, what jet sizes? (stock bike) sorry kx4fifshee

ok im a fool it is a kfx400 yamaha04 i here what yo mean sometimes races happn like that i was doubling my dog on a trailblazer and i beat a guy on a honda 400ex lol anyways yea kfx400 sorry guys but mos likely i have the odds Also i might as well throw in what about racing a stock yz125 (2005) same rider experience and wieght goes with the bike too the friend that is getting the yz nextyear has a '93 rm 80 it has a fmf pipe not sure what it is but im pretty sure the stock banshee well wak him too. anyways thanks guys latter

? he is picking it up next weekend or something lmao i didnt think they came out till 2007 or 2008 also it must be a kfx400 hmm ill have to call and find out well if its a stock kfx400 then what are the odds? thanks guys sorry but the mistake but ill have to find out

*sorry, ment to say kfx450r

i know these questions are stupid but im just want to know because my friend just go his 1st manual quad too (06 450r) what would win stock with an eqaul rider? same weight too on hard packed dirt thanks

do them get in the way when you kick er?

do them get in the way when you kick er?

do them get in the way when you kick er?

do them get in the way when you kick er?