Jump to content

gumby6t9

Members
 View Profile  See their activity

  • Posts

    686

  • Joined

  • Last visited

 Content Type 

Everything posted by gumby6t9

  1. gumby6t9
    click this ... http://www.nossmachine.com/banshee_heads.htm scroll to the bottom of the page.
  2. gumby6t9
    go to www.mcmaster.com search tubing and you can get the stuff you want...
  3. gumby6t9
    Foam filters filter too well??? Do you mean that they attract and retain too much sand at the dunes?
  4. gumby6t9
    It also depends on which one of them was having the seizure... or both of them, and the time at which they were having the seizure and the durations of the seizure(s)... LOL
  5. gumby6t9
    Wow... they went quick.
  6. gumby6t9
    I have also talked to denny about porting my cylinders. He seems like a very nice guy and was very helpful with all the questions I had. Glad to hear your happy with his service.
  7. gumby6t9
    That sounds odd... maybe the timing plate wasn't really at +5 degrees??
  8. gumby6t9
    Where are you moving to?
  9. gumby6t9
    Happy new years fellas... This pic has amused me for the past few days...
  10. gumby6t9
    WTF.... I've seen some stupid shit but that's just dumb.
  11. gumby6t9
    www.jetsrus.com sells screw kits... and their allen bolts.
  12. gumby6t9
    I had to up my pilots to 27.5 and up my mains one size.
  13. gumby6t9
    www.jetsrus.com I've purchased from here and got them really quick.
  14. gumby6t9
    just take your silencers off... don't forget to re-jet!!! :yelrotflmao:
  15. gumby6t9
    So is that a yes on the don't have to use a spacer w/ 795 pistons? I'm a tard... too much work today and my brain is fried! sorry...
  16. gumby6t9
    Do you have to run a spacer plate if you run the wiseco pistons made for stroker motors?
  17. gumby6t9
    Shit happens man... Glad to see you let us know what is up. Let us know how it runs!
  18. gumby6t9
    I think you need to relax wallace... it was a joke. If you take ritalin, or have in the past, I appologize.
  19. gumby6t9
    Relax!
  20. gumby6t9
    Did they have any proof that they are made in Taiwan? email Wiseco... I'm sure they will tell you!
  21. gumby6t9
    A decent starting point should be: 300 mains 27.5 pilots needles on 4th clip postion air screws 1 turn out. Remember... this is a starting point, you'll have to make minor adjustments!
  22. gumby6t9
    "CERAMIC COATED MOTOR" LOL!
  23. gumby6t9
    bump!
  24. gumby6t9
    Quick question... What size are the float bowl screws? Thread size and length please! Thanks!
  25. gumby6t9
    http://www.bansheehq.com/forums/index.php?showtopic=84021

BHQ Quick Links

×
×
  • Create New...