Bill

Ha thats exactly what I used, well yamabond(same shit). Im gonna let it dry overnight and give it a shot tommorow.

Yep its leaking around one of the screws,can I make my own gasket for it or will that not work? Thanks, Bill

Im in the process of building my banshee and I ran into the same problem,I have FMF fattys also. I took the protective spring off another rad hose I had lying around and put it there where it touches. I might throw a couple zip ties on it to hold it back also. Good luck

Well if my miss was other that the coil before than I shouldnt have any problems now since everything on the engine is fresh and new. Ill have her fired up by this weekend and see how it runs. Thanks for all the info B.

Yea my tester only goes up to 2000k, guess that explains why i'm not getting a reading from plug wire to plug wire. As for my tester it zeros out at 00.2 ohms, so my primary coil is testing 00.8 ohms. With the primary coil testing wrong will it give me a weak spark causing plugs to fowl? It worked on my banshee before I tore her down, but it did have a slight miss on the bottom. I don't know ill keep tinkering with it and see how it runs when I get the banshee done.

I am testing the ignition coil and I got a problem. When I test the primary coil I only get 00.6 ohms when its supposed to be around 0.28-0.38 ohms. And when I test the secondary coil (leads) I get nothing when its supposed to be around 4,700-7,100. Im testing it exactly the way the Clymer manual explains. I cleaned both ends of the leads and put new spark plug ends on. Is this coil junk?

Yea pull the carbs off and clean the pilots and mains, then give the rest of the carbs a good wipe down.

What the fuck is that.^^^

Oh so you want aftermarket stuff, my bad.

Sweet car man, wish I had one.

I got A stock axle that's straight and the splines and threads are great. And I got A stock rear shock in good shape. Let me know.

Its crazy how fast the world changes.

Redwings all the way baby!!!!!!!!

Check the pickup gap. Don't give up on her they are good running machines once you know how to set them up.

You want to get rid of the adjustable timing plate shoot me a pm.

Post pics and you may get more interest. :thumbsup:

Yea that's what I was thinking, the last thing I want is to put the case halves together and have a fuckin leak around the seals.

The bike is bad ass but 12 geez is a little steep, but I know you cant build that for less.

Anybody got some info on this subject?

Hey do any of you use any type of sealer on the outside of the crank seals? If so what do you use(yamabond,RTV,ect...................) Thanks, Bill

For the price and quality you cant beat a G-force axle, oh and it comes with spacers to make it +2 or +4

This dude is just mad because he got punked off this site last time he was talkin shit, lil bitch boy.

That's kinda what my shredders are doing but nowhere near that bad.

Fast shipping and I got what was described, great seller in my book. :thumbsup:

A little while back I was in need of some and I found some on e-bay,Brand new and came in a pack of two. Mabey you will find some there, good luck.