375hp banshees

every shee is different, i'm at 360 at sea level ...340 should be close enough to do a plug chop what are you switching from filter & jet wise?

every shee is different, i'm at 360 at sea level ...340 should be close enough to do a plug chop what are you switching form filter & jet wise?

mine ripped the stem out the first time i ran them... I'll never do that again ::

i just scrolled threw all of them from 1 link (faster that way, anyway :thumbsup: )

oh yeah, welcome to the HQ, let the addiction begin :woot:

damn Dan, your one of those clutch yankers huh LOL... nice, videos!! 87 you didn't have to much trouble hooking up you kept lifting up, about the 60' mark

clean them often, keep every thing tight (so dirt doesn't get in )& keep filter clean & DRY!!...you should clean them real good if its been sitting anyway, but yes your slide/sides are stuck, or you have an air leak get the carbs clean first & go from there& get a clymers manuel

hey dallas, how's the polaris going?

possibly, start it up at night in A dark area & look for A glow or sparks ...it can travel threw the water on the boots also, if there is enough.

i' ll take the case saver do you have the longer bolts also? are the calipers raptor also?

Dave, was your shee talking smack, looks like shee got her gator taped up... good to see we aren't the only ones that improvise(sp) w/ our #'s I thought it was A red-neck southern thing GITERDONE!! nice pic's somebody was busy

yep, 1/8 mile i hear ya, i hear there are alot of grants out there, that the gov. will give you to open places to ride ...I guess like me nobody has the time to run it & keep it afloat yep, & the ones that do get greedy ""Come on to Georgia we'd be glad to have ya!"" I need to get my bike set up b4 traveling that far all the other local tracks run on week nights & its to hard to do well dirt & asphalt's done, anybody know of any mud tracks they want to close up, just let me know i'm sure I can giterdone ::

yes it can be repaired, jankab just did one for me ( the one that bansheeracer9 screwed me on) he does good work!!

every time I get 1/2 way setup for racing the track folds WTF lease up again... hope they renew it... the bad thing is we had to go there to find out...I worked all night replacing my bent axle & mounting my new tires, just to show up & find this out... they could have put it on the answer machiene !!!! sorry, had to vent nothing else to do, now

you can invert your hubs for A couple inches also

he didn't go today(suprise suprise) but maybe tomorrow,there is plenty of dry just have to puddle jump to get back to it, i think after you guys see it youl never want to go to the other wooped out places again!! i would like to hit up your place fast maybe in the near future. going to the drag strip, I'll get w/ gary see ya!!

did you get yout porting done yet?

Thats what i always thought, you can make up the 2mm up top, but what about the 2mm @bdc ...da your the 1st person that has brought this up (that i've seen) I know there has to be somebody out there that has done it, what were your opinions on the power losses?

http://www.bansheehq.com/forums/index.php?...52&hl=times

lowest i've heard of is 8.0 ...average is 9-9.5 ...there are alot of variables

where at, I hope to hit croom next weekend...I'll talk to Gary when we go to the track tomorrow night about the 3-5 dates ...might hit there b4 also, to see how wet it is ...our buddy said he'll be there tomorrow, but he never goes so let me know??

dunno, I don't think travis is running A link?? but if he is then it looks like it be the same, he said 11" also... i would think its the same ,the extention should be behind the brackets, but couldn't say 4 sure?

10-4 thats along way to roll though :biggrin:

search click here

& hurry up already, its been down to long time to ride :biggrin: