NOS_350x

Ill be out there on my flattrack bike (it wont be lowered in the rear) Look for the 333 number plates on the blue banshee. The whole 333 racing crew is going to be there. One bike is a drag shee no plastic purple PC frame. One is all black with a extended swinger. All of us should be rollin with the 333 stickers on the bikes. Catch us at the drags and say hi.

If i could find a set on ebay i would just buy them. I figured it would be faster to seek out a set on here rather than wait for ebay.

I got some Toomy t-5's looking to trade them for some Graydon pipes, Would trade also for CPI's but i really want some Graydon pipes.

Ill be there 3 of my friends are coming with shees too, anybody elce wana come? Nothing special, Just ride, drag, eat, sleep. ooh gota thow in watch the eye candy in there somewhere.

Prodesign makes them, Along with the duncan intake manifolds.

The ball joint showed is for the a-arm, Not tie rod. I got some tie rods on my bike and they are extremely strong. I like them soo much better.

Why yes they are Duncanracing.com

Make offers, I need a coolhead, Intake, Dyna, or pvl, Make some offers, Make cash offers too,

You give me the money listed with each set and you will get them to your door.

The new banshee is a Raptor. What would the point be of building a new bike for a market (big, fast, open cc) they already have a bike for.

Comon guys make some offers. want these things Gone.

This is my firs race on these new Hoosiers. I cant complain, absolutely awesome. I could ride anywhere on the track. Typically i would have to push the cushion on tracks like this. now i can drop down low and still haul ass.

Typically there is an open class, This is open to any CC. Now many tracks have a powder puff class for the chickas, and i havent see a cc limit for that eather. They have front and rear hoosiers or AR's. Go watch at the track your going to race some first. Look at the other setups and figure out how much work you want to go into to to let her race once.

Fourth, Hauler 8 Paddle, 21X12-8 Paddle height 18.4 Nankang Carcass These are old haulers, and must need tubes at least, I cant exactly remember why i quit using them. $70 shipped Fifth, Hauler 10 Paddle, 22X11-8 Paddle height 18.4 Armstrong Turf tamer carcass. These need to be ran on beadlocks with tubes. $70 Shipped Sixth Geko 8 paddle 21X11-10 These are in good condition. Nothing wrong with these at all $100 Shipped Seventh ITP C-series 10" rims yamaha bolt pattern $130 Shipped

I got too much stuff pileing up, Make offers, and Trades will be considered, I dont want stock parts. Im building another flattrack banshee so flattrack parts might be good. First set, American Racers 20x8-10 SD23 compound, Still have several races on them, Tread depth is 4.85mm on one and 4.22mm on another The 4.22 is slightly weather cracked, and there is some white staining on the whitewall side of the tire. $70 Shipped Second set American Racers 19X10-10 Both are slightly weather cracked SD33 4.58mm (Outside) SD23 4.95mm Grooved (Inside) $80 Shipped Third, Hoosier, 61X10-10 RD12 3.16mm, 3.0mm Both are weather cracked some Worn crosshatches in the blocks are barely visible $60 Shipped

Im sponsored by Hoosier Tire West Hoosiertirewest.com The MX100 are extremely soft, The MX200 is about the same compound as others. They run about $80 each tire i think. Anybody can walk in and get eather compound.

Got these last week from Hoosier. Just ran them on the practice track and they got much more side bite than any other tire i have ran (and ive used alot). They are SUPER soft and hook up extremely well. I typically use a 18-11-8, and these are 9" wide. I was worried about them not hooking up enough, So far i don't have any complaints.

Your intrested in just the Gekos?

Anybody have a 4 mill crank laying around? We can try and work something out other than these rims.

Just courious if you know the names of the ktm guys?

I think these are the C Series rims (if not please correct me) With Geko's that have almost no use on them Or i can thorw on some nice American racers. I Need to trade for a 4 mill. Bought a bike with no crank, these where extra's with it, If you got a decent 4 mill lets try and work something out. No scratches dents or anything just need a little polish.

Does a crank come with it???

Pics to BasslakeATaolDOTcom

Here is a hint, Go to works website, Find out the length of shock you want. (based off of the length of yours) Now look at there product list for atv's. find ones that fit that length, Now jump over to ebay and do a bit of reasearch to make shure they mount the same. Buy some cheap stock shocks for whatever that is.

Looking good on that shee. No swaybar?? Just havent put one on yet or you not running one? Black- The lowering blocks sit on the brace under the shock mount. The aftermarket a-arms dont have anything to sit on. You must lowered with shocks or limiting straps.