NOS_350x

anybody??

Is it a wet system? Can it be easely modifed for a single cyl?

Soo got some questions, You guys going to rope off a section of the strip? Drag it? Can i bring my bikes and see how they run with ya? I also got a tree, No timing just starting lights Would it be worth taking? would yall use it? And this banshee

Riding with it on the bike The brand is unknown, but i picked it up off ebay for $50 mis listed.

Can i bring the Nin-z out to play?

Looking at that track its narrow and has an even smaller bule gruve. Soo, the rider that gets the wholeshot is going to win. Set up ur bike just to get that holeshot, and on a banshee that shouldnt be hard. Once your out front just take up the whole lane. If you get the setup right you will hook up just fine.

If its bogging too much take some weight off of the LR This will cause it to lift, you will be 3 wheeling through the turn but less traction/drag so you should be able to easely get into the powerband. If things are really bad just rember you have a clutch there Feather that sum bich, fiber plates arnt that expensive.

These 2 are from my very first race, Rollin on the 20's and straped down in the back

I gess that if you went to a 14 front your going to be too low. Im going to say get a rear 43 that should put you REAL close to where you where. Keep the higher gearing with you, If the track goes dry-slick you will want to be able to put the higher gearing back on and make the motor chug a little more.

The track isnt at the fairgrounds, Its out page ave, about 3 miles west of 99 they have a nice mx track and a tt track with a 1/4 mile oval. Cmaracing.com is about the only place that races there.

Taft is a fun track, Tulare is up 99 a bit further, They are both nice and fun tracks.

I run a 61-10-10 a 10 compound on the inside and 12 on the ouside. The rollout on the 59's is a bit small a well streched one is good but most are too small, I run larger tires because i got the power to pull it. I personaly hated the chainlinks on the front i run the sideways lined ones, they gripped much better

Email me Basslake(AT)aol(DOT)com and i will send you the HIGH res versions,

If you look at the 4th pic, you will see my linkage hanging down i was bottoming out taking off and landing every jump. But i was out jumping just about everybody. Just felt like i slamed on the brakes EVERYTIME landing. If you look at the diffrent pics you will see, I set my front so i have 3 or 4 inches of up travel, This way when getting on the gass going into a wheelie like accleration i still maintain some sterring. I wasnt upset about the jumps, I dont like to jump but i will race anything, When the flag drops i dont care about anything elce but winning. I will ride on anything.

My whole kit is the midrange, it was on there before it was a flattrack bike. I love it. I take 20 or 30 laps every day so 2 years is a long time. By the looks you wont tell a diffrence between the mids and highs. Hi revs are still a much lower hitting power than most other pipes. By far the smoothest ive riden

I have the national kit on my shee. For what it is your not going to beat it. The Reeds, carbs porting and pipes all work PERFECT together, You get a SUPER smooth powerband. I race flattrack and am going on 2 years on the same motor, so there shits going to last if you take care of it. You might be able to get more from another builder But Everything from that national kit works so good together. From my experiences drag racing at the dunes other shees dont touch that duncan motor. If you have any questions about it you can pm me.

Well here ya go, My last race, Kicked ass the first half the race, Got tiered, 10 lap heats and 15 lap mains with around 55 sec lap times makes a LONG race. I love this pic, pullin the front wheels off the ground in the middle of a turn, WOOT!!! This is suposto be a TT track??? WTF?

http://www.bansheehq.com/forums/index.php?...mp;#entry816971

Less than a week away, Any hq-ers goin?

First thing get rid of the 22's, dam thats going to kill ya. the 1/4 mile ovals with 61"hoosiers i run 16/41, Everything elce, all the cussion tracks i run 18" kenda knarleys with 15/41. Thats what i run on the 1/8 and 1/10th tracsk we got here.

i have stockers on the bike.

Intrested in selling?