Jump to content

letsgetthisdone

Members
  • Posts

    705
  • Joined

  • Last visited

Everything posted by letsgetthisdone

  1. If you have pod filters make sure both of them are on. This happened to me when I first got my pods and it acted the exact same way.Got the left filter back on within 5 minutes. Then it seized............ :shoothead:
  2. I am. I think they're decent. U can read my above posts for more info.
  3. By abuse I mean: slaming 2-foot depp whoops in 4th and hitting any jump that won't kill me if I fuck up. By symmetrical I mean: The a-rms have bungs(internally threaded tube) welded into them at the ends for the hiems to screw into and the left side a-rms the bungs are welded on closer to the frame. To remedy this I had to 1. gring some material off of the upper a-arm bung to clear the spring and 2. the hiems r screwed out farther on that side. It looks kinda goofy but my whole bike is a hoopty so it doesn't matter to me. Where I had to grind is not part of a weld so it did not weaken the a-arm. And the a-arms I have don't have that gusset plate under the shock mount tube either and they still hold up to the above abuse. BUT u definetly need aftermarket shocks if you get a-arms as well as brakelines. The guy that sells the ASR arms has brakelines and they are pretty nice :thumbsup: (I bought my brakelines from him). Hope this helps. :beer:
  4. I agree. My asr's hold up fine to my abuse. The only thing I don't like about them is that they are not totally symmetrical(sp) left to right, but that is solved by adjusting the hiems so its not that big of a deal. I would go with the asr's, but NOT the fullflights. The fullflights are all heim joints which will make it a bitch to dial in the alignment. If you do get the asr's I would reccomend the set that has the upper a-arm on hiems for the balljoint as well as the frame pivots so you can adjust your caster. Heres a link to the ones I'm talkin about.....click My bad if they are the same ones you already posted but I didn't look at your links. Later
  5. 1. Sepultura (they're from brazil) 2. Metallica (pre-black, black album sux) 3. Pantera 4. Slayer 5. Cannibal Corpse 6. Slipknot (older stuff) 7. System of a Down (1st album only) 8. Rammstien (German) Hey Polish....... Tom Licus is THE MAN. I listen to him whenever my parents aren't around.
  6. 15:1 compression, wouldn't that kill any kinda 2stroke. 4-pokes run on 114 octane when they have 14.5:1 compression. edit: "Twin batteries with charging system."
  7. There was a guy in my neghborhood that had one of those, unfortunately he moved to so cal. He had helmet cam of him bombin through three foot deep whoops and you could see the speedo ont the gps reading 75-80mph, he also had a built cheetah in it puttin out almost 95hp. That bike ripped and could take hits that would break me and my shee (in its current configuration) without even flinching. It did have a lot of body roll though.
  8. .........as hard as you want. :biggrin:
  9. :yelrotflmao: :yelrotflmao: :yelrotflmao:
  10. I would go with Elkas over the hydrodynamics just cuz elka is an established company and hydrodynamics isn't(they're relativaly new).
  11. I would go with elka's. The works "steelers" have a steel bod, hence the name, whereas the elkas have a hard anodized aluminum body which is just as strong as steel but will shed heat much better. Get the elkas.
  12. My IQ dropped 15 points just from lookin at it
  13. :yelrotflmao:
  14. wolfpackracing.com, race tech, tcs, elka(i think).
  15. It could be ur gearing too. That 15t front sprocket you have listed in ur sig is gonna be to tall for the mods you are runnin. Put a stock size sprocket (14t) back on and u will prolly beat the craptor.
  16. where could i get tickets from, cuz me and my dad r thinkin of goin
  17. what make is it cuz my dads mat-co gets it right every time.
  18. You could also get an in/lb torgue wrench that way it will be in the middle of its range instead of almost as low as it will go like a ft/lb wrench, to bad they all cost the same for the good stuff.
  19. free bump. Man that sux. good luck
  20. put me in!!! :beer:
  21. Call up king. They'll make ya whatever you want. Its just gonna cost a lot.
  22. 270 mains, they might be rich though so if it doesn't pull all the way through 6th go down one size
  23. Do your parents give you the "You need to slow down speech." I swear that is the worst part about crashin. They let you buy a fast bike (and then let you make even faster) and then tell you to ride it slow. Man thats annoying, but I guess they gotta do it so they can say they tried.....really hard.
  24. Badass shee you got there :thumb: . where did u get the grill?
  25. I would say do suspension next. Get some +2+1 a-arms and TCS or Elka shocks to go with them, and then send your rear shock to shane at wolfpack racing (his link is under the title for the suspension forum). You only have to get the a-arms if you're really into bombin the whoops or gettin alot of air, if you you just like to ride around doing the shocks alone will be fine. Having 60hp isn't gonna do you any good if you can't soak up the bumps.
×
×
  • Create New...