SAVAGE420

Thats cool man, i will hit you up and let you know when i come down.

Right at north road on the border of Coquitlam and Burnaby., 3 min walk too the sky train. Leaving anything out for the cracked heads is a no go for me down there. :biggrin:

I wanna bring my bike but i wont have anywhere to put it at my grandmas apartment across from loughed mall....my truck wont fit under the underground secure parking and i would never leave my bike out in the back of my truck ANYWHERE down there lol I will see how things go though....

Yeah i run the 30's and love them. Great all around carbs for sure. But im coming down to the coast for a week in 2 weeks so i could always bring this extra set and you can try them out if you want and see if it cleans up your problem.

Well i have my stockers laying around with a pretty new cable if you want them $55. shipped, could get them there to you in a day. Sounds like yours are messed up and the slides are hooped.

Theres unlimited space to list the mods here and Tons of room for pics too. Location price ect ect??????? Must be murdered out cause i don't see anything....

I don't know, but if you sell my your rockets that would be cool of you and cool for me!!! :beer:

http://lmgtfy.com/?q=where+can+i+get+disco...p+atv+tires+%20 Take your pick.

Put a single 35-39mm carb set up on there. Get a noss head on with 20-19 cc domes, stick a adj timing plate and set it at +4. Take those stupid fmf pipes off and get some low end pipes like pro curcuits or if you want to get real gay go witha 2-1 pipe. All of this nonsence will bump up your low-mid power alot. Or you could always drop a shit ton of money on some Power valve cyls.

You looking for the timing plate that the stator bolts to right? I have one 15 shipped.

Well thats what i meant to say too. Cascade makes and has top notch everything. :thumbsup:

Get ahold of Verde power sports , they made my cover and i fuckin love it. They will make any cover you want. Or try cascade also.

HI :biggrin:

IMO if your going to get after market arms, for sure go with arms made out of chromoly which those are not. Also cheep hiem joints are shit. To buy even just 2 top of the line heims joints, they would cost more then the whole arms all together. So with that being said, go with some wicked arms with ball joints for about the same price. They are 100% chromoly. There usually on ebay all the time but there not on right at this time. Check again tommorow for the "wicked" a-arms

Ya thats sweet dude. Good job. Seen a couple rippin on you-tube and they look fun as hell.

Yeah i lil bit yes. What was your PSI before on the stock head. Make sure you do a compression test after you stick that head and domes on. Wouldn't hurt to check your squish too, as it only takes a few mins to do both. Also you should get your self an adjustable timing plate and set it at +4. both those mods together will be a good increase. Also what fuel are you running?

Air leak? Ever do a leak down test? What carbs are these? Happen outa the blue, or for a long time?

Sorry, on my pistons i meant .20 over and NOT .50 over....lol Yours are still .30 over though.

Just reduces fuel slosh around the main.

The first couple. It should say on top at the very end, ether: 6400, 6450, 6500 6550 ect ect ect. then all should start with 513. So what do they say??? BTW this is for Wiesco stock stroke pistons :thumbsup:

The thing under a thing? lol Here is a pic of a stock LEFT banshee carb flipped. You point out the thing under the things thing what your talking about. :laugh: This pic has the white plastic splash guard and main jet taken out.

Whats there to know? Go to the hardwire store, get some steel rivets and a manual rivet gun and have at it....pretty simple man.

What missing parts?

Keep pumping like you do with brakes. Just when the bleeder is closed pump it 5 times instead of one time...will take a bit anyways. Also at the beginning if its bone dry fill the rez and open the bledder and stick a hose on the end into a cup(so there is no mess) and let gravity help fill the line...takes about an hour or more this way AND then bleed it like i said above..it really helps alot and then its much easier to get bled.