DemonShee

Last Thursday I went and had lasik done on my eyes. I think not fighting with my glasses anymore while riding quads and especially snowmobiling is about priceless. I have fought them for 14 years now and enough was enough. The surgery was very easy and not scary at all. First few days felt like I had contacts in, thats about it. Lots of dropps to do. Went yesterday and had my week follow up and I have 20/15 in each eye and I could see 3 of the 5 letters on the 20/10 line using both. No sensativity to light and no halo's either. Pays off to pay more and have the best work on you. How is it the best mod? If you cant see, you cant go fast!

It's really hard to say. I think as time goes on and the etreme drag guys will eventually be paying top dollar for good Banshee's to mod up. I dont see anyother reason the banshee will stick around, as good as the thumpers are getting. Initially for the next couple of years I think they will drop some in value.

Couldnt have said it better myself!!! BTLS is the bomb and Howard just added Danny Bonaduci to his line up as well. Worst part is always switching from Maxim to Howard 100 and 101. As for Maxim, dont forget Evan and Brian, when Evan goes off, it is funnay as hell!!!

I can vouch for these cylinders. I have seen them run and raced agaianst them many times. YOU WILL NOT GO WRONG WITH THESE I PROMISE YOU!!! What are the tires on the rear rims?

If you can get it to Wyoming, you gotta deal. I have a 2002 Shee, 4 mil stroker, +4 swinger, Dune port by Redline Racing just to name a few things. A 2001 in really good condition with the adds you have will go for about 3K right now. notice my name in my signature.

Matt Coulter aka The Kangaroo Kid rides on of these from time to time. I looked into having one imported a few years back and it was going to run me about 14K setup for a banshee motor but no motor in it. Hint Hint, I have been told the new KTM looks VERY simular.

Dude you fucking suck, I just lost my dinner. to the bathroom. You serious, he put popcorn in his condome? Maybe thats why they call it the cornhole?? So he littlerly fucked him to death then? Man, leave it to the fricken queers, make a snuff film and get away with it.

It's the most cliche' saying in the world but its words are the truest ever spoken, " God created Adam and Eve NOT Adam and Steve!" Silly *****got's dicks are for chicks LMAO this is funny stuff, we can say fuck, shit, damn, ect....but they bleep out *****got's. Whats a matter? Afraid your gunna hurt sissy loose ass's feelings??

Holy shit batman, did I start a chit throwing contest or what LMFAO!! First off MEAT, I did not hit on Brooke, well didnt mean it that way anyway's. I think she is a very good looking woman. Didnt have any idea that she goes both ways. Just because she goes both ways doesnt mean she isnt pretty. It was a compliment to her and I hope she took it as such. I do beleive in my Lord God and his son Jesus Christ. I beleive that the Holy Bible and the Book of Mormon is true (Oh boy I can hear it now). Being a fudge packer is wrong, the world was cleansed once for this, it can, and will, happen again. If I am sinning for judgeing then so be it, I will deal with it when I have to. *****'s make me sick. They are NOT born that way. Thats fuggin bullshit. I do beleive people can have defects at birth and one might be being more feminin due to a chemical imbalance. Just because thier off in thier chemistry doesnt make it automatic that they are attrackted to big ol hairy man asses. Thats friggen sick period. They are as looney as a child molester, murderer, or someone that licks windows and talks to five people at the same time in an empty room. Being a gay man and society accepting it is just like a Murderer getting away with his crime for reason of insanity. Well no shit he is insane, he just killed somebody doesnt mean he should get away with it. I hate it when people say shit like "you are scared of gays, they wont hurt you, it's a phobia" WRONG. I am not scared of one of them. I will kill one of them just as easy as anyone else if myself or my family is threatened. I dont make it a point to stay around when a Queer is around, mostly because I want to loose my lunch right then and there. Not scared of one of them, they just make me sick. Some on here might think I sound like the biggest jerk in the world. Good for you, you dont know me and I dont give a shit.

Odaen, that was the funniest shit I have read in a long time. I got an all stainless steel 4 burner BBQ with the side burner. Way friggen nice. Steaks anyone???

To hell with those fucking *****gots. I am so damn sick of this it's ok to be gay bullshit. Like I have said all along, all an actor needs to do to win an award is have a role where they are raped or are gay and you will get a nomination. It's like Hollywood wants the world to turn gay. They obciously didnt read the Bible. 40 days and 40 nights with a shitload of water means nothing to them. The other day a ***** called my wifes salon to get an appointment, he was so excited, it was his coming out party on New years eve . He wanted her to "freak his hair out". She doesnt do wild colors so she turned him down. I told her she should have booked it then I would show him "freak him out". I say send em all to an island and leave there ass plunging asses there. Silly *****gots, Dicks are for chicks. Especially hot ones like Brooke.

Will the ADA head take the Pro desighn domes?

You have a PM

The Kids new riding gear: My Wifes new riding gear: Yep santa was good to us! The New year got started off right as well. My wifes new snow track maker: Spoiled isn't she!!!

AMEN!! Thoughts and prayers are with you all.

Hmmm and most are saying the dis-comforts of the Shee are why it is going bye bye??? NOTHING can compare with the shee when it comes to haulin ass!

Is that a patch I see on the tire on top?

Been professionaly doing systems since 1992. The best way to find the correct amp for the sub is to try and closely match the RMS power ratings of both the amp and the subs. this would be in the configuration that your are running them. If your going to load your amp down to .5 ohm then you need to match your speakers RMS rating to the RMS rating of your amp rating at .5 ohm. Thats simple enough...BUT WAIT....there's more: The configuration of your box effects the RMS rating of your subs. If you have a box....lets say Kicker Comp 15's In a box desighned with a -3db down point of 30HZ. Can you say power handling down the toilet???? I did this exact box, fricking huge, with huge ports. Sounded wicked as hell down low. Power to the 15's? 50w RMS each. We built this box to be paired with a set of Solo 10's that were tuned in the mid-sub bass region. Then we had a set of the MB quart 6's, 4's and tweets. With having the five sizes we achieved a amazingly flat line and scored very high. I also did the other end of the spectrum for my brother. He had 4 12" JL w3's in a bed box. We ran them off of 2 Kicker 500SI amps. They had small sealed back chambers they threw into a single compression chamber that flowwed through the port into the cab. We hit 152.7 db in Jackson WY at the USAC event off of the glass and 166.2 db in the portwars. When desighning a box, you eneter the subs Thiele small perimiters into your calculator. The calculator will then tell you at what goals you want, what should be close to your speakers new RMS power handling. Remember, the Max power rating is only required to hold for a max of 3 seconds. There is alot more to an amps gain than meets the eye as well. What is the output voltage of your HU or sound processor? If it is a high output, like lets say 6v or higher then you would use deffinatly less gain. Less the gain the lower your THD is. The lower the THD the higher your speakers power handling is due to less heat from irregular voice coil movement. Next to take into consideration is your crossover points as well. A tuned box has some of the crossover desighned in BUT it does this by cancelling out the sounds before exiting the enclosure. The Sub is still trying to produce these sounds. You should use a good crossover with a subsonic filter. this too helps in your speakers power handling abilities. Then take into account rather the crossover is at slopes of 6,12,18, 24 db . The higher the slope the more precise the cutoff is. The lower the more overlap there is between your different component speaker levels. So it sounds likea 24 db should be best....not exactly. First you will a unatural sound and wont be as smooth in your car. The next negative is it has a full 180 degrees of phase shift. If you cannot correct your phase shift from the crossover, you lower your subs powerhandling. a 18 db has a 90 deg. phase shift that isnt as bad if you cant compensate for it and wont compromise power handling. I prefer a 12 to 18 db slope. Dont even get me started on propper power supply and amplifiers internal power coils. I will be here all night. So to kepp you all from getting a major headache over this stuff, just follow the general rule I posted above. Use box deminsions recommended by the manufacturer. You will never have a problem. go beyond that, you better get to know your pro installer really good.

Preach on brother Rocket!! I understand what your saying Garg but the ones that are killing eachother are the extremists that you mention. I worked with a few Iraqi refugee's from the 1st gulf war. Some of the best guys I have ever met period. They couldnt wait for Bush to go in there and whip some ass. that way they could finally go home and see thier families. The families were everything to them. I personally think we have been to easy on them over there trying to save face because our president is a fucking liar. It should be that they know if they fuck with us, were going to tear thier freaking heads off and shit down the hole. If they dont fuck with us they will have thier country and thier freedom.

Man where do you live and is realestate expensive there????

Man Jeff, Why didnt you tell me that on the phone? LOL. I was going to get mine done but these are easy to get to so i think I will just save the money on lightening the flywheel and put it towards an adjustable timing plate with a 200 watt stator instead for now. Give the motor a shot and if I think it needs to be different I will try lightnenign it. Like mentioned before it would be easy to switch back I am sure.

I have had sirius for a year now. My wife got it for me last Christmas. I love it, never thought I would, but then she got it and man it's great!! Nothing better if you live out in the boonies like I do. My favs are 108 Maxim, 20 Octane, hair nation, alt nation, NFL Radio, Big 80's, and Kidstuff. Yes, Kidstuff, that station is a life saver on long trips with the kids, they love it. I am looking forward to finally getting to listen to a whole Howard show. Never have had the chance before now. I just hope he doesnt over do it and become completly tasteless. He about crossed the line several times already. Now he has freedom so i am thinking LOOKOUT!! Then again, the man is a genious, so he may be smart enough to keep it reel and realise not everything has to be such a big statement against the FCC.

This has been my families project for the past week. The train is a lyonel train that is the Polar Express replica streight from the movie. The village is a Department 56. Enjoy. [/img]/i27.photobucket.com/albums/c175/Sako7STW/Picture013.jpg[/img]

Had the same problem last week. once you get the nut off spray some penetrating lube on the inside of the flwheel in the area where the nut was. It may take 2-3 good hitts with your impact before it pops off. You may also want to leave the pressure on the puller and tap the flywheel with a hammer to halp lodge it loose.