Jump to content

jankab

Members
 View Profile  See their activity

  • Posts

    234

  • Joined

  • Last visited

 Content Type 

Everything posted by jankab

  1. jankab
    Looks like you need to get a bore job, I agree that you also need to split your cases and check out your crank bearings
  2. jankab
    I'd do the reeds, then go for the port job :thumbsup:
  3. jankab
    Yeah what he said :thumbsup:
  4. jankab
    How much for the bike?
  5. jankab
    I agree
  6. jankab
    The Hiper wheels weigh more than aluminum Douglas wheels. I had a set on my shee
  7. jankab
    Huge waste of money, you can pick up a lsr chromoly frame for less than half that and you would only save a couple more pounds with the ti frame over a chromoly. If you're that worried about weight, take a shit right before you ride and that will help. :beer:
  8. jankab
    If the head is flat (and has been checked by a machine shop) I bet the cylinders are not
  9. jankab
    I can send you a bottom end trans and all for 100 bucks
  10. jankab
    Weisco is the only way to go, they have been proven in just about every bike out there. IMO spend the extra$ and go with the forged weisco :thumbsup:
  11. jankab
    With that big of a motor I'd be looking for at least a +8, stock gearing will work no problem, you're going to need 12 paddle extremes to hook that much power to the ground
  12. jankab
    Just buy a 68 don't waste your time with the (super) lol
  13. jankab
    You will pick up on the bottom, but will lose some top end. Your best bang for the buck is a set of 34mm pj's
  14. jankab
    250 is a little more reasonable , depending on condition
  15. jankab
    28/1 Klotz Benoil
  16. jankab
    3's
  17. jankab
    Here's what I've done in the past, take the carrier off the swinger, spray the hell out of it with penetrating oil (down in the splines) with the sprocket hub facing the ground, pound the axle on the ground and the carrier, sprocket hub, and brake hub will all come off.
  18. jankab
    Yeah but it's a lot better than epoxying a penny to it LMFBO
  19. jankab
    CPI better for parted motors Toomey better for non ported
  20. jankab
    I use 30wt motor oil and change it often
  21. jankab
    I would, It's cheap insurance against an air leak
  22. jankab
    Or give this guy a call 248-755-5060 Tyson Racing
  23. jankab
    The crank by it's self is worth about 7% power
  24. jankab
  25. jankab
    This guy is an azz, I want to buy these and all he is doing is playing games, won't give me a price

BHQ Quick Links

×
×
  • Create New...