superdave

I have some....send me you address and I will mail them to ya.....Might be early next week, but I will get then to you free.....Later D.

Call Jeff as F.A.S.T. 785-364-5325 great service and great prices.....D

I have never had the problem either......My bike runs great...at glamis I ran 6th gear easy.....ran real hard....check the sig for my mods.... D..

Happy Birthday fellow Coloradian.....D

Easy way to tell.....take both head pipes off and if the right cylinder has lots of oil in the exhaust port and not on the left side then the crank seal is bad...take about ten minutes....Good luck...D

Thanks JUSTINTOXICATED....yes gear oil .....I am not saying it IS the crank seal I am saying from my experience it may be......check out responces or call some engine builders and ask....seals go bad..new or old..just happens. Good luck..D

Yeh most likely if it is just right side it is the crank seal....Mine did it. Oil smells like gear oil and not premix because it is crank oil. If the left side seal went out it would be sucking air and cause it to run irratically(SP)....I took the motor out and pulled the bottom case off and did not get into the top of the motor to replace mine....Lots of fun, but can be done....call around to shops that know banshees and they will tell you...I called Jeff as FAST and he let me in on what I was looking at....pm hinm at FASTOYS ....D

Is it coming out of both?...or just the right side...? Both is probably jetting, bad or old gas and oil....if it is just the right side is most likely a crank seal....good luck D

I have T6 pipes with 19cc domes and FAST porting and I was at a 210 main at glamis....I might have went to a 215 if the temps went lower.....I would take a 195, a 200 and a 205..just to be safe...good luck..D

Tell us more about the elevation and temps.....also did you put new needles in and also adjust the air mixture....?...Is it running good everywhere, but not on top....? just a few more questions...D and yes check the timing key..

I am at 4800' and with my 450 with a HMF and cam mod and no lid with a K/N filter I was at a 48 pilot and a 168 main with a GYTR needle in the middle....Ran great....D

sent a pm..D

rear shock is stock.....seems to work fine for me...d

bump.....

We got a LTZ-R 450 in at the shop and got it built.....looks killer..except the tires are for MX only...18" rear and 20" front...when it sits next to the YFZ450's they look tiny...also it is wide and very noticable next to other sport ATV's. Rode it down the street and it runs WELL.....pulls hard and quik.....sales manager would not let me demo it for the week end so I can not give a true report, but it is a nice ATV...If I was going to go MX only or just happened to have $7500 laying around....I might ride yellow...Dave

RIPPEN If it does not sell.....then maybe we will ride this summer....I am also having ACL reconstruction ..maybe....we will see....It might just take me longer to build my rai if it does not sell...Talk to you later. oh and thanks for the bump... Dave

pic#4

pic#3

pic#2

pic#1

Yes it is FAST......Thanks for the bump Jeff...mud91 I will try to post pics this weekend...Thanks...D

I have the TR6 pipes with porting, carb, head 19cc and SRP reeds and I think my bike runs great...Others have rode it and like how the power comes on early and revs out hard and farther than stock......have not tried it with T-5's so I can not give a comparison....Just an FYI...D

I will not be upset..make an offer.....talk is talk...money is what matters...D Used Banshee $2000 Suspension $1000 Motor $1000 Get close and it is a deal...D

It is a bad day.... have come to decide that riding is great, but time for a new projest...SANDRAIL ...So I am selling my 2001 Banshee. Color...Blue w/ cut fenders.. Motor..FAST Play/Dune port with 19cc Noss head and FAST clutch with mod shift shaft. Chrome TR6 pipes with Hush Kit 2.5. Trinity 2into1 carb kit and KN filter with outer-wear. Ricky Stator timing plate...SRP Reed cages Suspension..Alba procomp +2+1 a-arms with Elka Dune shocks.. Ricky Stator +4 axle. Rims/Tires ITP HD Holeshots front and rear and ITP .190 rims... aftermarket swing arm skid.... Bling....Cascade clutch and water pump cover.. Cascade 3 piece stator cover Cascade throttle cover and front brake res cover... polished alum radiator grill....gas cap DG nerfs.. and a set of dune slider paddles... Pro Taper 7/8 bars New Renthal chain and 13/14/15 front sprokets....stock rear 41... This Banshee is Fresh...LOW LOW Hours.....almost all the stuff listed is new with low hours....Motor also has new crank seals....(Those are fun) I will not part out and do now want a trade...Please no low ballers...Make me an offer..It is only worth what someone is willing to pay..It is in Colorado, but will travel a little....Thanks Dave PS will post pictures this weekend if there is interest...

They are a totally new company from the two stroke Rockets......I believe this company is out of So Cal...and I heard it was an old owner or originator of Big Gun exhaust....We have sold a few at the shop I work at...people seem to like them for the money...quite compaired to the rest and less money...D