quad4me

and I am interested in HUBS...PM Me $.

well Im sure that you have impacted the ATV community in the most positive way you could. It's not like the cops are just looking for reasons to shut everything down. But hey....maybe your area is not quite like all the others. im just givin you shit.....

Logan..... where have you been riding over there? Croom? Or is there local spots?

bump

PM Holyman...see if he has any!

im just taking a stab......no axle right? I still need one.

>> http://cgi.ebay.com/ebaymotors/ws/eBayISAP...ssPageName=WD6V are the hubs identical as banshees? I have had NO interactions with any Warriors.

how much wider is that exactly? right now my rear tires are flipped...and spacers on fronts. With a +2 +2 would I still be close to the same length after I put my rears on the correct way?

another method:: "Measure the total length of the box and divide that dimension by 2 to find the centerline of the trailer box. For each foot of total box length move the centerline of the axles toward the back of the trailer 1 inch from the centerline of the trailer box." here is link for info above site..... http://www.trailerplans.com/axle_placement_bumper.htm

can't purchase 'rubbing alcohol' in the UK, WTF? sorry I have no help on your ? .......but why the hell can you not get a sterilizing solution like Alcohol?

only other reason it would spit is if it were running too hot. So then we would need to know all intake, engine and exhaust mods and exact jetting, your location weather and altitude, and riding style. Then someone will ask if you did a plug chop, and how that looked. BOTTOM LINE = NORMAL. relocating bottle will help, but I think most people here will tell you if that is all you are noticing and it is not GUSHING out then it's just fine. Just watch it and see how and when it is doing it...does it do it no matter how fast you go......or only when goin slow......or is it a drip, or splooge. good luck

about 60/40 split towards the rear of coarse. That was off some utility trailer plans I found on the interweb.

Just put in the NGK BR8EIX Iridium plugs.....seem a hell of a lot bettert han my old standard BR8ES's. Will write a bit more after a good hard ride this weekend....weather permitting. Like $17 and change at Advance Discount Auto. Cheaper than online after delivery and such. Try em out....

Brand new Fly adjust on the fly clutch lever (used it for one race).$25.00 shipped >>can i get a pic? [email protected] if no pic..then a link to a site with one I can see. Thanks

i got some works pic'd here...make offer. valved for 220-250 I think. So you will be aight. I am not near that weight..so they sucked when I got the shee...Still work great though.

still avail?

Price on rear axle with and without hubs. ALSO front hubs with brake rotors attached........not calipers VERY INTERESTED if decent price. PM me!

the whole shaft moves. That is the bearing right? Whats the best option for repair?

sold yet? lemme know

List updated..still need those parts!! b u m p

I saw this thread and just thought I would ask..... my stem moves up and down a little.....so I need to redo the BOTTOM "mount" right? Got anything for that Holyman?

$ shipped to 32907? PM Me! if good deal i will take it...paypal OK?

Need some parts...mostly small stuff. IF you have anything just let me know asap....here is my list. 1 banshee rear hub <no longer needed SILVER Alum handlebars (replacing stockers) Case Saver Front brake rotor screws/bolts (hold disk to hub) EDIT: Need stock banshee axle...straight and clean. Thanks for looking. I need these small parts asap...so just let me know what you have!!

well you have about 1.2 million options here. PM or Email me..i can set you in the right direction depending on what you want to do. A couple things to consider are: 1. Your Budget 2. Your goal for your site (what it will be used for) 3. what web developing software you think you can learn! Or whether you want to find a service with a webpage template or "builder" web control panel. Hit me up! Ryan