Jump to content

bansheeryder_69

Members
 View Profile  See their activity

  • Posts

    1,700

  • Joined

  • Last visited

 Content Type 

Everything posted by bansheeryder_69

  1. bansheeryder_69
    I have my fmf fatties/silencers. Their yours for $325 shipped. I payed around $700 new. No scratches/rust/etc.
  2. bansheeryder_69
    CHOP 'EM OFF!!! HOW TO: 1. mark where you want them to be cut with colored marker (you have white fenders) 2.make sure both sides are even (adjust if needed) 3.using a dremmil tool,handsaw, or small grinder cut along the marks you have made 4. clean up the edges using files/sandpaper 5. admire how badass and fresh your banshee now looks
  3. bansheeryder_69
    you should probably just rebuild the whole clutch if those are torn up
  4. bansheeryder_69
    get it powdercoated I'm sure you could find a color that you like
  5. bansheeryder_69
    as long as your not messing with the fuel/air/exhaust/or intake you shouldn't have to mess with the jetting. When you mill the head all it does is bump the compression up which is just how the fuel/air is combusted within the cylinder so you should be fine
  6. bansheeryder_69
    To get the rust off use an S.O.S pad. And for the jetting check BenBB's jetting faq
  7. bansheeryder_69
    NEW LOW PRICES!!!!! TIMING PLATE-SOLD STAND-$50 HANDLEBAR BAG-$27 PAINTBALL GUN-$45 come on guys I need to get rid of this stuff
  8. bansheeryder_69
    COOL BEANS. thats a badass shee
  9. bansheeryder_69
    post the pics up here. Where are you located at?
  10. bansheeryder_69
    alright man I will definitely get with you like a week b4 we leave and we will hook it up in UTAH!!!!!!!!!!!! anybody else wanna come
  11. bansheeryder_69
    if your worried about reliability why are you getting an aggresive port? those carbs if anything will just make the banshee run better, get some 34's
  12. bansheeryder_69
    get NOSS also get some different pipes. Those t6's suck with a modded motor, if anything sell them and get some cheaper t5's
  13. bansheeryder_69
    GET THE PODS. i run them and they eliminate a lot of hassle with the carbeurators. You might want to make sure they are REALLY tight when you clamp them on though. I have had them fall of after cleanings bcuz they weren't tight enough. They work awesome for the dunes. theres nothing better more flow and cleaner look
  14. bansheeryder_69
    CHAINSAWGRAPHICS.COM these guys are GOOD
  15. bansheeryder_69
    I'll take paypal for the timing plate, corkforbrains you have a pm. Anybody else-this stand is awesome but I sold my sled and don't need it anymore, it will hold up a banshee I used it when I put my yfz shocks on and everytime I change my front tires.
  16. bansheeryder_69
    alright heres what I have all prices are shipped: 1.a what is believed to be vitos adj timing plate. goes up 10 and retards 10-$40 2.DK cutoms atv/snowmobile stand red/black-$60 3. atv handlebar bag (universal mounting)-$30 4.brass eagle maurauder paintball gun w/mask,LASERSIGHTS,paintball container,movie,and the hopper.gun has only been used twice.-$60
  17. bansheeryder_69
    would you meet us at the exit and show us around down there? anybody else with some info 4 our little "road trip" I have no idea what the dunes near vegas are called I just know that they're north and on the left hand side of the road if your coming in on I-15
  18. bansheeryder_69
    Were going road tripping for spring break, were going down to St. George utah and the dunes just north of vegas, is there any other dunes that we could hit on our way there? anybody have maps/pics/directions. it would all be GREATLY appreciated. Maybe even a fellow rider to go with. thanks .DILLON
  19. bansheeryder_69
    I'LL BE THERE What will you be on?
  20. bansheeryder_69
    Bigred is awesome, funny as hell and a nice guy.
  21. bansheeryder_69
    The bigger the better put a 14 in it with a big ass shot of noss if the cases blow just get new ones
  22. bansheeryder_69
    Buy an old used banshee, tear it down to the frame but keep all the miscellaneous parts then rebuild it powdercoating/t-rex/elka/lonestar
  23. bansheeryder_69
    alright I will give you a shout out tommorrow
  24. bansheeryder_69
    looks tits
  25. bansheeryder_69
    1.drill holes on both sides of the crack. 2.go and get cool colored zip-ties from the local wal-mart/parts store 3. use them in a criss cross pattern to secure the plastic together 4. go riding and get praises from all your buddies with cracked plastics that don't have friends on the HQ

BHQ Quick Links

×
×
  • Create New...