FireHead

I think it could be named Leroy.

Maybe their print screen button was broken on the keyboard?

Word.

The Roll guards are the ones to get, but they are currently out of production. They are pretty highly sought after at the moment, so if you find a set for sale, more than likely it will cost you a good chunk of change.

Cascade Innovations, Twister, or White Knuckle............ All of which are in Boring, OR. (reccomended in that order). Depending on how exotic, you wanted to go, I might be willing to do the work as well.

I couldn't have said it better myself.

I agree. Putting an injection system on a Banshee is 100% doable and it's been done. The mechanical systems are not very impressive. The EFI systems are much better, but are expensive to do correctly........and then there is the whole other issue of putting it together and tuning it (requires experience that most folks don't have). With that said Gigot racing will put one together for you and tune it. Kevin is the only guy out there who I feel is 100% competent doing this commercially on a Banshee. I can't quote what he charges for such a thing, but I am pretty sure it's over $1200 for a turn key setup.

Did you measure them? I think they are bored out. They are not really an off-the-shelf deal.

.........and I think the carbs are 41mm.

If it helps: I did all the case work. The carbs were bought from Cascade and setup by me.

Bump for a great seller!

Drain plug, dual vents / overflows, big main sump, anti-slosh baffle, and clearance for clutch lever.

Bump for a great guy!

That's probably true. You have to remember that bike was built back when everyone was building those homo custom themed harleys..........

Let's see some more videos! I suspect it must be hard to take a video of everyone racing that bike?

I wouldn't make fun of the pipes........... That bike will hand most everything else around that displacement it's ass in the dunes. Check out Cascade's website to see several other bikes that are for sale, which happen to be better than most folks.

Bump for a great seller and an even better hillshooter. That is an HS Customs fiberglass front end on that thing (Twister (Lou Jr.) is making his own now as well)............

+2 for Cascade, or ther is always TCS and/or going straight to Eibach.

Sounds good! I will for sure make it to Denver this year.

I have not made anything for the Stangeranger. I do need to fix a bunch of stuff on it. I would love to come down and what you shoot yourself again. Seriously, I am trying to get down that direction here this year. I'll let you know when I get something worked out.

I won't claim the carrrier since the one I made was a rip-off of a RAD carrier. The only difference was that RAD engraves their name and some numbers in the carrier near the seals. Mine did not have that. I'm pretty sure it was RAD that was making ally swingarms too, but they usually were not for stock carriers (same sort of design though). RPM was making aluminum axles before most other people though,,,,,,,,,

No, but I can suggest how to make a XXXXXL Cock ring out of a truck tire inner tube......

I don't make much anymore........ If fact I think you own the last ATV thing I made.