racer

I agree, it should resemble the keg throwing contest at world's strongest man. so we need 10 midgets of equal weight and a 15 foot high fence.

I know, but its college, there are slutty girls everywhere! I cant wait for next semester, I have a large freshman course in the fall. That means tons of fresh little NAIVE sluts. And yes Mark, fat chicks are very sly. Especially the ones who know how to dress to cover it up. Those will always getcha.

dayum. that will really reach out there and touch someone.

i agree, just tossin out ideas.

I do have a banshee, its just in pieces. some are in my desk, some are under it, even some are still bolted on! I do agree, you can lay down some mac on facebook. its like email, but with pics so they cant trick you if they are fugly.

i guess that depends on the condition of your car. you're pretty much looking at a comparison of two vehicles none of us have ever seen before, that both have infinite variables. im gonna say good luck to you on this one. but could you get a pic of that adj rear linkage? id like to see that.

food for thought. I rebuilt my rear shock myself with a racetech kit. that kit is not much different than what anyone else is going to give you; and with only $200 in it, its a lot cheaper than a new rear assembly from elka... plus once you have done it once, any other shock is just going to get easier and easier, no reason to pay big money when you can do it your self. you say theirs may work better, well you can b uy a TON of shims and shock oil to make yours work just as well before you stack up to the $1000 price tag of a new new elka. just depends on how much work you want to put into it.

nah, thats a waste of money. kill them on site, and dump 'em in a trash can. the other's a waste of money. or let them loose across the border and if they cant out run my .308win, then so be it.

haha, thats cause tyler is the only one who can pull that off. post whore! haha. what about facebook? how does everyone feel about that?

I second that. theoretically you could cut a cable with tin snips if you took the time to cut each individual strand, but not a chain. just one piece of cold steel.

well stock is ohlins, so id factor that out of the extras.

duct tape and bailing wire my friend

No, you dont have to. There is another thread on here about it, and it even gives the parts number for the new seal. You pretty much destroy the old seal removing it and replace with a new seal that does not have the lip. Its just a matter or pulling the crank gears and what ever else is on the primary shaft.

It will be a cold day in hell before I give a school my cell number.

I bet I could. haha. seriously though I could if I had numbers to justify buying large sticks of alum.

I just machined some billet arms for an HPI savage, and let me tell you it was a bad idea. now when my buddy wrecks his truck he'll break bulkheads instead of bending the stock plastic arms. so I guess the point is, update your internal parts before you go for billet arms and Ti knuckles.

No way. That is not even plausible. One person dies in a shooting, who honestly cares? Isolated shootings happen all the time and you cant shut down a whole city over it, V Tech is almost that size, by population. The police didnt do anything wrong. They simply saw what appeared to be an isolated event and reacted as such. If every event were treated like a possible terrorist attack people would care about twice, then it would be a boy crying wolf. The man with the gun in his hand is the only person to blame. If someone thinks otherwise they have no common sense, which is really not all that common.

Oklahoma State does. I completely agree with what you have said so far. It pisses me off that people are throwing the blame around. The blame belongs to the zipperhead that pulled the trigger; not the cops, not the school, not the hospital. People need to learn to accept responsibility for their actions, and the news media needs to stop being so damn ignorant to try to pin it on other people. The dude got dumped by his bitch and lost it, seems pretty clean cut to me that this was his fault.

the one from the rear of the case, and the one from the water pump area meet at the frame at a Tee fitting. The third side of the tee goes up over the steering hoop and vents to the atmosphere. lemme know if you need a better description.

the only options in my book, maybe add the sand skate 2's or padlabrats. the rest are just dumb.

People ask how it happens, I can think of some class scenarios I sit in everyday where this could happen on a much larger scale. Like my physics lecture class for instance. 300-320 kids in a room with 3 exits, lock up the front two by chain easily and pop in the back door. Arena style seating, it would be a shooting gallery. Plus half of them look and smell like terrorists anyways. Pretty scary to think about. This is a sad deal for sure, but even if there were the best plans on earth in place, when a guy comes in firing they'll go to shit in a hurry.

ehh, the modulus of elasticity is only marginally better, and if im not mistaken thats a huge factor in bending resistance.

he must have d-loaded the new firefox, it underlines when you misspell shit.

Hell at one point I think laker customs was offering clear and chromed plastics. I WOULD IMAGINE, because I dont know for sure, that the trick to that is too start out with a perfectly clean piece and not have to use the acid cleaning bath.

he who cant spell 'coolant', be really heated when his shit blows up says colfucious