FOXBANSHEE30 Posted May 7, 2008 Report Share Posted May 7, 2008 so how long should the plugs last? i think mine is fouling plugs too often. Quote Link to comment Share on other sites More sharing options...
huskyohilux Posted May 7, 2008 Report Share Posted May 7, 2008 As far as I know they don Quote Link to comment Share on other sites More sharing options...
FOXBANSHEE30 Posted May 7, 2008 Author Report Share Posted May 7, 2008 i guess my jettin is rich, my bike wont idle and and i cant figure it out, im assuming its my pilot jet? any ideas? Quote Link to comment Share on other sites More sharing options...
IrideA250R Posted May 7, 2008 Report Share Posted May 7, 2008 I ran a single plug for 3 years in my 250R, riding 3-4 times a week. I replaced it when I rebuilt the engine. Quote Link to comment Share on other sites More sharing options...
bunboy1 Posted May 7, 2008 Report Share Posted May 7, 2008 hi there, you should try adjusting your idle speed on the carbs. this will raise your throttle slide up a little, it will let more air into the motor and it should let your bike idle better. Quote Link to comment Share on other sites More sharing options...
ellison445 Posted May 7, 2008 Report Share Posted May 7, 2008 LMFAOOOOOOOOOOOOOOO :laugh: :laugh: :laugh: :yelrotflmao: :yelrotflmao: hi there, you should try adjusting your idle speed on the carbs. this will raise your throttle slide up a little, it will let more air into the motor and it should let your bike idle better. Quote Link to comment Share on other sites More sharing options...
monster_energy06 Posted May 7, 2008 Report Share Posted May 7, 2008 i guess my jettin is rich, my bike wont idle and and i cant figure it out, im assuming its my pilot jet? any ideas? hey man i had that problem to here what these guy helped me fugure out chek yur carb slides they might in on the wrong side also my float bowls were on the wrong carbs also on bowl has a hole in the btoom to feed the choke tub chek that out first .. also instead of using br8es get br8eya Quote Link to comment Share on other sites More sharing options...
monster_energy06 Posted May 7, 2008 Report Share Posted May 7, 2008 hey man i had that problem to here what these guy helped me fugure out chek yur carb slides they might in on the wrong side also my float bowls were on the wrong carbs also on bowl has a hole in the btoom to feed the choke tub chek that out first .. also instead of using br8es get br8eya never mind just seen yur runing 2 into 1 setup fro yur mod list sorry bud.. still try the br8eya and what do u mix yur gas at?? what oil? Quote Link to comment Share on other sites More sharing options...
FOXBANSHEE30 Posted May 7, 2008 Author Report Share Posted May 7, 2008 i just took my plugs out and i have a lot of gunk in the plug, what could be causing this? Quote Link to comment Share on other sites More sharing options...
hylander88 Posted May 8, 2008 Report Share Posted May 8, 2008 maybe want to check the choke...maybe warn out O-ring??? Quote Link to comment Share on other sites More sharing options...
chevy7398 Posted May 8, 2008 Report Share Posted May 8, 2008 i change mine about once a year usually in the springwhen i do alot of maintainance Quote Link to comment Share on other sites More sharing options...
shee rips Posted May 8, 2008 Report Share Posted May 8, 2008 i always carry spares, but usually dont have to change them, just whenever i decide to, and the old ones become my new spares. my last set went for over a year, plus however long the guy before me used them for. sounds like youre running too rich on the oil mix if its all gunked up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.