OnlyA2Stroke Posted April 24, 2007 Report Posted April 24, 2007 Ok, first of all I sent my flywheel off on April 13th and still haven't heard anything from boonman. Anyone know him personally or can tell him I am waiting on a reply on what is going on? I sent my money and flywheel to him to lighten with a return address attached. If anyone can get a hold of him another way, can they tell him one of his customers is waiting. It has been 11 days since I sent it off and spoke with him. I don't know if he is busy or his computer exploded? Well, any help would be appreciated. Also, if I get the flywheel back does anyone know any easy way to install it? Keith Quote
bigboybanshee Posted April 24, 2007 Report Posted April 24, 2007 I think you're jumping the gun a bit...it's been slightly over a week since you mailed it TO him...only 6 business days...considering that the mail usually takes 2-3 days, then he has to shave it and send it back, and from what I remember the flywheel lightening is side work from his daily job, you have to consider all of this.... boonman lightened a flywheel for me, did a great job, very honest person. Just be patient! :beer: Quote
RIPRuck Posted April 24, 2007 Report Posted April 24, 2007 Yeah bro slow your roll!! Did he specifically say you would have it by now, I doubt it cause that would be some super fast service. Quote
suzuki0702 Posted April 25, 2007 Report Posted April 25, 2007 ummm....yeah..stick it on the crankshaft and tighten the nut with an impact! Quote
CRAZY-SHEE! Posted April 25, 2007 Report Posted April 25, 2007 (edited) lol use an impact gun btw make sure ur flywheel gap ir right.. w/e it is.. i think imma make a new topic cause i cant figure out what the flywheel gap is or what it should be... Edited April 25, 2007 by CRAZY-SHEE! Quote
Bansh-eman Posted April 25, 2007 Report Posted April 25, 2007 a ez way to messure the gap is set it about aa thick as a matchbook. Quote
MFIC Posted April 25, 2007 Report Posted April 25, 2007 lol use an impact gun btw make sure ur flywheel gap ir right.. w/e it is.. i think imma make a new topic cause i cant figure out what the flywheel gap is or what it should be... it should be 0.020 to 0.018. Quote
jbooker82 Posted April 25, 2007 Report Posted April 25, 2007 Ok, first of all I sent my flywheel off on April 13th and still haven't heard anything from boonman. Anyone know him personally or can tell him I am waiting on a reply on what is going on? I sent my money and flywheel to him to lighten with a return address attached. If anyone can get a hold of him another way, can they tell him one of his customers is waiting. It has been 11 days since I sent it off and spoke with him. I don't know if he is busy or his computer exploded? Well, any help would be appreciated. Man I am really going to feel sorry for the builder that you send your cylinders to be ported. After a few days and asking if they are done yet when most builders are back loged at least a month. :yelrotflmao: Quote
dajogejr Posted April 25, 2007 Report Posted April 25, 2007 Danny is a great guy to do biz with. He is (was last I talked to him) a machinist by trade. He did my flywheel and shift star a few years ago. Unless he specifically promised you a certain day/date turn around time, relax...he'll get you taken care of. Quote
cam2 Posted April 25, 2007 Report Posted April 25, 2007 yep, he's a good guy who does great work, he'll take care of you. i know how it is to wait for your stuff, but some things take time. where are you located? the last i knew he was in buffalo NY. Quote
jkylnhyde Posted April 25, 2007 Report Posted April 25, 2007 i sent him my shift star a few weeks ago and it took him a little while to recieve it and then took me a little while to recieve it back.. He did a good job and i have no complaints! Old saying goes: If you want it bad, you will get it bad Quote
J-Madd Posted April 25, 2007 Report Posted April 25, 2007 He's lightened 2 of mine. I think turn around time was less than a week, but he may be busier than when I sent my last flywheel out. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.