Its finally time.

[CRAZY-SHEE!]

ok guys.. over the week i got my stroker installed. got everything done.. finally time for the big bambino. I was gonna get the porting done by jeff but he is just rediculasly backed up. who should i have it done by? btw it needs to be for a 4mm stroker 5mm longrod motor

[87sheerips]

Id go with Rob at RB Racing of MI. His name on here is MACHWON, i dont have his number on hand but can get it later.

 

I have his work, and my bike runs great, im super happy with it. Not to mention the turn around is 2 weeks, and costs $175 for an aggresive dune port which is what I have.

 

You cant go wrong with him, im sure others will chime in and agree.....

[Leadfoot350]

What pipes are you going to run with it? The porting all depends on the pipes. Find a builder who will tell you the port numbers they are going to use and are open with it. I use kevin herr at herrjugsracing.com If you are going to change the pipes eventually you need to do that before you port it or have it ported for those pipes you are going to run. Ask them about the transfer work also. Most builders dont want to do them because they are the hardest to do and take a lot of time but the rewards are great. The banshee has very small ones. Get the top case matched to the cylinder.

[CRAZY-SHEE!]

i have t-5's on. i want a dune/play port.

[mpbanshee]

There are a lot of good builders out there. My motor is done by Dave Moore (davemooreracing.com). Price was reasonable, turnaround was good, and my bike flat out hauls ass!!!!!!!

[wrecker03]

Id go with Rob at RB Racing of MI. His name on here is MACHWON

 

Rob just finished my cylinders and head. Just got them back over the weekend. He's a good knowledgeable guy. I'll have to let you know how everything works once I get the shee running, but I thought he was up front and honest and very reasonably priced.

[bansh03]

Id go with Rob at RB Racing of MI. His name on here is MACHWON, i dont have his number on hand but can get it later.

 

I have his work, and my bike runs great, im super happy with it. Not to mention the turn around is 2 weeks, and costs $175 for an aggresive dune port which is what I have.

 

You cant go wrong with him, im sure others will chime in and agree.....

 

 

Yup, click here-----> RB Porting

[!TWISTER!]

325 for full drag porting... :thumbsup:

[Leadfoot350]

for t-5s try a 189-192 exhaust durration with a 126-128 transfer. The higher the number the more power it will produce. Call around and see who you like. Talk to them and see what numbers they are going to use. If they dont tell you then I would be worried. Anyone could check their own number really easly so its not going to be a sercret when the cylinders come back to you.

[baddsheee]

I'm satisfied with the porting done by Jim at Passion. Give hime a call and see what he has to say.