00tbanshee Posted March 2, 2006 Report Posted March 2, 2006 the mods done to my banshee are my head has been milled, .60 over with wiesco pistons mild port job, nothing big but nice,rad valve reeds and cages the cages has been ported,no air box and now i am running toomey t5 pipes which work awesome but was wondering how cpi inframe pipes would work with the mods that i have done Quote
ellison445 Posted March 2, 2006 Report Posted March 2, 2006 Depends on your port job, Cpi you will lose some bottom end but gain more top. T-5s are a good all around pipe Quote
bkabina Posted March 2, 2006 Report Posted March 2, 2006 Stick with the T-5's till you decide to get some good port work Quote
Tim C Posted March 2, 2006 Report Posted March 2, 2006 (edited) Stick with the T-5's till you decide to get some good port work 481156[/snapback] Why buy two sets of pipes - one for before porting and one set after. I have CPI's and no porting and they work fine Edited March 2, 2006 by Tim C Quote
hittintrees srh Posted March 2, 2006 Report Posted March 2, 2006 ive also been thinkin about gettin some cpi's i love my t5's but im lookin for a little more on top for shootin hills what ill probably end up doin is keepin my t5's for dune shreddin, and when i wanna drag, then ill just slip op the cpi's that could be cool Quote
banshee tuner Posted March 2, 2006 Report Posted March 2, 2006 Since you allready have T5's I would stick with them. Quote
sand rocket Posted March 3, 2006 Report Posted March 3, 2006 i just switched from t5 to cpi. I would say that if your not planning on a hillshooter or dragster I would stay with the t5. I liked the pull of the t5. the only reason that i switch is, that my builder recomended that i upgrade to cpi before i went to the 4 mill. Quote
2003LimitedBanshee Posted March 5, 2006 Report Posted March 5, 2006 Why buy two sets of pipes - one for before porting and one set after. I have CPI's and no porting and they work fine 481159[/snapback] Because he already has T5's and is thinking of switching to CPI's. Quote
WALLACE84 Posted March 5, 2006 Report Posted March 5, 2006 I have all the mods you have and more and my T5's work great with my setup! Plus you only have mild porting so it should work fine Quote
2003LimitedBanshee Posted March 6, 2006 Report Posted March 6, 2006 I have all the mods you have and more and my T5's work great with my setup! Plus you only have mild porting so it should work fine 482299[/snapback] As far as motor mods are concerned you guys are just about even from everything I can see. Don't get me wrong you got a lot of other cool shit, but motor wise it's pretty equal. Still I agree the T5's should work good for a while longer. If you go with a big time drag port etc. etc. like ellison said you should see more top end with the CPI's. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.