How do I Cut the fenders off

[CrazSandDrager]

I was wondering wut is the best way tot cut the fenders of?f I want to but im afraid of secrewing it up.

[fastbanshee8]

An axe comes to mind, but seriously, you can use a hack saw, die grinder, jig saw, or anything else, that has a fine tooth blade or not very aggressive grinding wheel. I taped mine off with masking tape, to prevent scratching my plastic, and cut slowly. Take your time, and do a good job on the prep work, and it will come out fine.

[Wallrat]

Damnnnn that search function kicks ass!!!

 

CLICK HERE NUMBNUTS

[[email protected]]

after a few beers , do what this kid did

 

 

[banshee tuner]

I drew it our with a pencil and cut with a hacksaw. Every thing went well.

Edited February 26, 2006 by banshee tuner

[Dinner]

I drew it out with a marker then used a utility knife, then sand them down

[RIPPEN]

I layed down masking tape to get the look I wanted. Used the inner edge of the tape as the cut off line. When I had the desiered shape/look I just cut along the masking tape with a jig saw(fine tooth blade). Then since my plastics needed some TLC anyway I got a Plastic Renew kit and went to town. Wet sanded the cut edges and rounded them a bit and it turned out pretty damn good

 

RIPPEN

[Hilarious]

after a few beers , do what this kid did

 

 

478996[/snapback]

 

Yeah man. A few beers and a reciprocating saw.....

 

I used a dremel on mine.

[[email protected]]

wasnt my bike nor am i the one cutting it . OWNER KNOWS BEST lol lol i used duct tape to make a str8 line look at it over serveral beers then use the recipricating saw and then sand the fuck outa the ruff edge . The kid who cut that was like watch this " FREESTYLE " and just started cutting i lost it laughing n took pics

[Shee-Male]

I layed down masking tape to get the look I wanted.  Used the inner edge of the tape as the cut off line.  When I had the desiered shape/look I just cut along the masking tape with a jig saw(fine tooth blade).  Then since my plastics needed some TLC anyway I got a Plastic Renew kit and went to town.  Wet sanded the cut edges and rounded them a bit and it turned out pretty damn good

 

RIPPEN

479213[/snapback]

 

Same, same for me, used fine sandpaper to round or bullnose the edge, plastic renew dose wonders

[unstable concepts]

Just cut my fronts... drew a nice straight line with a dry erase board marker and took the hacksaw to it. Afterwards I cleaned it up with the dremel to make it nice and smooth. I took my time on it and went slowly but still took less than 10 minutes to do it.

[810darren]

i masked mine to but i used a drummel tool with a little cut off wheel worked real well then sanded with 320 then with 600 grit.

[chris642]

a little saw works fine, or maybe a dremel then sanding. thats what i did

[KpnitG]

I did mine and a buddies with a razor it was kinda hard but il looks really good!