jeepman380 Posted February 28, 2005 Report Posted February 28, 2005 Check out these ported cylinders that are on eBay. What kind of port job is that? I've never seen anything like that before. Here is the link... http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=43977 Quote
locogato11283 Posted February 28, 2005 Report Posted February 28, 2005 wtf??? wonder if that shit will even run... Quote
XxMeltIcexX Posted February 28, 2005 Report Posted February 28, 2005 Looks cool... THats all i know about them Quote
KGL Posted February 28, 2005 Report Posted February 28, 2005 Port job? looks like someone went digging for dinosaur bones in there ! Have no idea but he is right ,it is radical... lol Quote
Indubitably Posted February 28, 2005 Report Posted February 28, 2005 Looks like some 250r intakes to me Quote
racer Posted February 28, 2005 Report Posted February 28, 2005 wtf??? wonder if that shit will even run... 330796[/snapback] hell, i dont know if that will make enough compression. Quote
Justintoxicated Posted February 28, 2005 Report Posted February 28, 2005 looks like an expensive paperweight to me. Probably snag a ring in the first few seconds. Quote
BigRed350x Posted February 28, 2005 Report Posted February 28, 2005 That is nuts. I don't want to imagine what it would do to rings after a while. Strange... Quote
frocashmoney24 Posted February 28, 2005 Report Posted February 28, 2005 never seen anything like that, and i know i dont have the balls to throw my money at em. Quote
The Rebel Posted March 1, 2005 Report Posted March 1, 2005 Looks like some 250r intakes to me 330837[/snapback] What he said. Looks like it would flow. Quote
jinx44 Posted March 1, 2005 Report Posted March 1, 2005 "pistons seemed a little small" There is a mm or more gap all the way around. Look at the right side piston (piston on left in the picture). They didn't even chamfer the ports. Quote
Weirdman Posted March 1, 2005 Report Posted March 1, 2005 SIZE=7]I read up on them and they are called booster ports they let more air in when the piston is low enough to collect air if you can see.. it is at the same hight as the other intake chamber ports. it just lets more air in aka more HP Quote
PUSH THE THROTTLE Posted March 1, 2005 Report Posted March 1, 2005 Somebody's bid $220 on them????? Quote
rocketboy Posted March 2, 2005 Report Posted March 2, 2005 ill tell you the scary part is someone actually is gonna pay alot for these jugs in the end ,apparently the porter wasnt real big on the intake velocity theory as he would have like none whatsoever,and look at how the intake windows flow in to the upper transfer, i mean what used to be the upper transfers. holy shit this engine tuner must have had parkinsons diseaes and shaked uncontrollably with a die grinder in his hands it only goes to show if you put ported jugs on fleabay ,theyll sell like hot cakes, regardless if it was ported by captain caveman with a hammer and chisel or not,kids are dumb! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.