found out something cool about my shee, port work

[joshv5.0]

i was looking at my bike today and found that my shee has boysen power rad valves w/ reed spacers and some carbon riber lookin reeds

 

 

 

 

also has more port work that i thought i will post pics

 

[RNBRAD]

Man those juggs are smokin. Literally.

[Leadfoot350]

Looks good. I dont know about those reeds but the porting looks good.

[joshv5.0]

Looks good. I dont know about those reeds but the porting looks good.

286745[/snapback]

 

 

bad part is one of the jugs have to be resleeved and i'm hoping that it can be saved, it suffered alot of damage when my connecting rod snapped

[joshv5.0]

Man those juggs are smokin. Literally. 

286703[/snapback]

 

 

[banshee04le]

I agree, the port work looks decent. If I had to guess, I would say that

someone was shooting nitrous to that motor seeing as how someone

took a grinder to the top of that rad valve and cut a groove, probably to

allow the reed spacer mounted nitrous nozzles to extend down into the intake path. Yep.

[superchicken]

no,thats where the boost bottle(crossovertube)goes.mine are the same way

[banshee04le]

no,thats where the boost bottle(crossovertube)goes.mine are the same way

287196[/snapback]

 

Yes sir, but that is ground out well past the original casting for the

balance tube...you can't tell? Josh, you got it in your hand, has

it been ground on? I used to have a set and they didn't look

quite like that .

[FIRST BANSHEE]

personally, I would get rid of the rad valve and get delta 2s. I liked them much more than the rad valve. what's a couple more hundred, right.

 

looks great

[joshv5.0]

no,thats where the boost bottle(crossovertube)goes.mine are the same way

287196[/snapback]

 

Yes sir, but that is ground out well past the original casting for the

balance tube...you can't tell? Josh, you got it in your hand, has

it been ground on? I used to have a set and they didn't look

quite like that .

287227[/snapback]

 

 

 

nah it doesn't look like any grinding has happened unless it was machined there then its original, but who really knows except the guy that had it before me

 

so am i correct calling this a mild trail port?

 

MAN I CAN'T WAIT TO GET IT RUNNING AGAIN!!!!!

Edited December 2, 2004 by joshv5.0

[joshv5.0]

personally, I would get rid of the rad valve and get delta 2s. I liked them much more than the rad valve. what's a couple more hundred, right.

 

looks great

287237[/snapback]

 

a couple of hundered doesn't seem like much compared to the money i have spent on this rebuild

[Bensshee]

Is that triple ports drilled into the sides of the jugs? On a mild ported bike how does that work out?

[rebelbanshee2]

that isnt a normal looking port! I see extra intake and exaust ports! (edit i saw wrong, no extra exaust ports)

Edited December 2, 2004 by rebelbanshee2

[racer]

that isnt a normal looking port!  I see extra intake and exaust ports!

287668[/snapback]

where ex ports at?

[locogato11283]

the intake ports are what i think alot of people call boyeson boost ports. personally i think they are worthless. the passion 12 port has them just on a much larger scale. when i had my passion jugs i had those boost ports blocked off with jb weld and the bike ran exactly the same. therefore im not convinced they do anything. i dont see any extra exhaust ports but i guess there could be.