oof pipes clearance

[nyb]

just switched from inframes to oof pipes and the stinger is to close to the rear tire. is the stinger a tuned length or ok to trim a little length. stock frame and stock length swingarm.  

[locogato11283]

How much would you need to trim to accommodate tire growth?

You will lose some RPM by shortening the stingers. They are that length for a reason.

Why stock length? Buy a +2 arm and solve all your problems.

[nyb]

probably would have to trim 1-1/2" to be safe. i guess thats the way i will go longer  swinger. stock length for better turning , i ride it in the woods sometimes. thanks

[SKEETER]

Chop a few inches off. Wont need the rpms for da woodz 💁‍♂️

[kawa110]

Oof hard for right corners


Sent from my iPhone using Tapatalk

[kawa110]

Tight***


Sent from my iPhone using Tapatalk

[specialblend07]

OOF for wood riding... this sounds like my type of situation!!!!!

[nyb]

im not a pussy, worst case you crash. 

[specialblend07]

Nothing can go wrong there.

[Tedder]

I've been told by two builders who make pipes not to cut the singers any shorter than 10"   

[OMW2FYB]

On 12/26/2022 at 9:20 PM, Tedder said:

I've been told by two builders who make pipes not to cut the singers any shorter than 10"   

stinger length really only effects the sound, cutting a inch off of the stinger wont effect the rpm enough, if at all (to the guy above) people have their own theory's on how a pipe works, its physics.