Can we do better than that???

[ClaudeMachining]

Hi group.

 

I have a little bit of play on the stem and i was looking at the stem bushing system.

 

There is something better???

 

Envoyé de mon SM-N975W en utilisant Tapatalk

 

 

[Canadianshee]

Break out the cnc to cut a Delrin or Teflon bushing.

Sent from my LG-H873 using Tapatalk

[caleb90]

Put the needle tips from your covid shots as shims

[Fearnot]

I recall someone saying a billet steering stemp clamp with a grease zerk would work but it was a yfz450 model. The company was maybe JLS? I'm not a 100% so I wouldn't buy the part.

[kawa110]

OMI steering block is what I have been using


Sent from my iPhone using Tapatalk

[Mighty Shee]

I just went through this same problem. I purchased a Roll Design steering stem and new bearing clamps from Farm and Sand Toys. I had a bit of play from that same area you’re describing. The Roll Design steering stem measured the exact same in diameter as the stock steering stem. I went ahead and ordered those clamps in your picture from Yamaha (factory replacement) and problem solved. No more play.


Sent from my iPhone using Tapatalk

[locogato11283]

https://www.ebay.com/itm/124741324496?chn=ps&mkevt=1&mkcid=28

[ClaudeMachining]

Thx everybody for the inputs!!!

I'll make something.

Envoyé de mon SM-N975W en utilisant Tapatalk

[specialblend07]

On 12/11/2021 at 2:22 PM, ClaudeMachining said:

Thx everybody for the inputs!!!

I'll make something.

Envoyé de mon SM-N975W en utilisant Tapatalk
 

 

Should make something with a grease zerk so it can be extra smooth

[kawa110]

OMI has zerks. Mine are solid. Nice o rings.


Sent from my iPhone using Tapatalk

[locogato11283]

OMI has zerks. Mine are solid. Nice o rings.


Sent from my iPhone using Tapatalk

I think that’s what I have on my duner.

[T13]

JLS  has a zerk on it also.

[Man-O-Steele]

I also have the Omi. Been running one for 10 years. Great product.


Sent from my iPhone using Tapatalk