Amsoil

[johngolfvr6]

does anyone know what ratio I should run for amsoil synthetic???? and whats the best oil to run in my banshee

[H300F]

i run their interceptor and their reccomended 50:1. i know some of their other oils like series 2000 mix at 100:1.

[Bigairee]

You should mix by the manufacturers instructions. I mix my amsoil at the recommended 100:1.

[johngolfvr6]

im running a fresh motor right now, the oil i have is the 100 to 1 amsoil, what do u guys think is the best mixture for me right now, iv gone through about a half of a tank of gas with yamalube around 30 to 1 mix

[H300F]

break it in with 2gallons of that yamaha. then you can use your amsoil at what they reccomend.

[Yamahammer]

i run the 2000 at 40 to 1

[johngolfvr6]

thanks for the input guys

[Klotz]

i run ams oil series 2000 non synthetic...and i run 40:1

thanks

shane

[Banchetta]

Amsoil 2000: 40:1

[PlaynSand]

The Amsoil 100to1 synthetic oil can be used in 50to1 , 80to1 or 100to1

the 50to1 and 80to1 ratios should be used in high horsepower and high rpm applications.

You can fine tune the ratio for your application.

 

We have tried them all and banshee's seem to like the 80to1 ratio .

 

 

The series 2000 racing oil is designed for modified high performance engines with extended rpm range and high compression , Hence the name racing oil.

Recomended ratio of 50to1 is recomended.

Dyno testing with this oil concluded 50to1 was optimal ratio for minumum high temperature torque loss.

 

I have used this oil in all my two strokes since day one.

[itsaripper]

Like the bottle says 50:1. I have used av gas, 50:50 mix race gas and super, and super alone. It burns clean and protects great. Its the quality of the oil that gives the protection.

[zR2]

series 200 at 50:1 on sunoco 112 had the head off hte other day to put the cool head on looked great