JasonB Posted January 23, 2016 Report Posted January 23, 2016 Installing my Alba a arms right now and totally overlooked that the package didn't include new tie rod ends (ball joints) when I bought them. I sold my old set up already so now I need to buy all four. Do you guys recommend any certain brand that's reasonably priced? I need the inner and outer tie rid ends Quote
draggins10 Posted January 23, 2016 Report Posted January 23, 2016 You bought the a-arms new? Mine came with tie rods and ball joints Quote
JasonB Posted January 23, 2016 Author Report Posted January 23, 2016 It came with the ball joints that Connect the hubs to the arms and also new tie rods, but there are no tie rod ball joints. Quote
Strm Trpr Posted January 23, 2016 Report Posted January 23, 2016 http://www.amstarmanufacturing.com/BansheeParts.html ^^^ or OEM from RMATV. << They have excellent prices and get you your parts quick. You'll need 2 inner and 2 outer tie rod ends and 4 each cotter pins and jamb nuts. Personally I went w/OE Raptor 700 inner and outer tie rod ends and associated hardware. The thread that goes into the tie rod is 12mm rather than Banshee OE at 10mm. When i bought my LT Fireball a-arms Larry suggested using the Raptor 700 rod ends and made tie rods for use with Raptor 700 rod ends.. Quote
registered user Posted January 23, 2016 Report Posted January 23, 2016 stay away from Chinese junk whatever you do Quote
Andreb84 Posted February 15, 2016 Report Posted February 15, 2016 (edited) I was about to ask this same question lol my alba a arms didnt come with tie rod ends either...im thinking tusk or american star anyone know if these are any good??? Edited February 15, 2016 by Andreb84 Quote
banshee#527 Posted February 15, 2016 Report Posted February 15, 2016 American Star look good. Was thinking about buying a set of the 12mm MX Pro Quote
trickedcarbine Posted February 15, 2016 Report Posted February 15, 2016 No. Do not buy any American Star. Might look good, but everything I've touched from them squeaks, creaks, crunches, and turns to rust/corrosion. Quote
JKJK Posted February 15, 2016 Report Posted February 15, 2016 i prefer+run the honda style myself.They are opposite yamaha style,in that the tie rods are solid not hollow with the male threaded ends + the rod-ends are female.You can purchase the complete kit from rocky mountain atv, Quote
banshee#527 Posted February 15, 2016 Report Posted February 15, 2016 Can you get them for +2+1 arms? Quote
banshee#527 Posted February 15, 2016 Report Posted February 15, 2016 Cool. I'll have to check them out Quote
jayzx10r Posted February 18, 2016 Report Posted February 18, 2016 I was just on the RMATV site looking for the +2+1 Honda tie rod kit for Banshees but didn't see them.Could you post a link? Quote
bluebanshee98 Posted February 18, 2016 Report Posted February 18, 2016 http://www.amstarmanufacturing.com/BansheeParts.html ^^^ or OEM from RMATV. << They have excellent prices and get you your parts quick. You'll need 2 inner and 2 outer tie rod ends and 4 each cotter pins and jamb nuts. Personally I went w/OE Raptor 700 inner and outer tie rod ends and associated hardware. The thread that goes into the tie rod is 12mm rather than Banshee OE at 10mm. When i bought my LT Fireball a-arms Larry suggested using the Raptor 700 rod ends and made tie rods for use with Raptor 700 rod ends.. For what year raptor for the tie rod ends? Any pics? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.