JordyRoo Posted December 8, 2015 Report Posted December 8, 2015 (edited) Im in the market for a coolhead & have been looking at the chariot ones... however i did see a thread saying about poor castings etc? Can anyone shed some light on this? Will only be running on a 4mm stroked 66mm bore motor. Edited December 8, 2015 by JordyRoo Quote
Bennett131 Posted December 8, 2015 Report Posted December 8, 2015 Im in the market for a coolhead & have been looking at the chariot ones... however i did see a thread saying about poor castings etc? Can anyone shed some light on this? Will only be running on a 4mm stroked 66mm bore motor.They aren't casted, they are machined. Quote
sheerider11 Posted December 9, 2015 Report Posted December 9, 2015 Im in the market for a coolhead & have been looking at the chariot ones... however i did see a thread saying about poor castings etc? Can anyone shed some light on this? Will only be running on a 4mm stroked 66mm bore motor. Who said that and where? PM chariot racing. There the best person to talk to about there products. I have one and like stated, it was machined. Quote
registered user Posted December 9, 2015 Report Posted December 9, 2015 Casted ? I guess they let just anyone in here Quote
Nightmare Posted December 9, 2015 Report Posted December 9, 2015 He's probably talking about the "plug" situation a few years ago. Go chariot, youll be fine. Sent from my LG-H811 using Tapatalk Quote
willaduncan Posted December 9, 2015 Report Posted December 9, 2015 He's probably talking about the "plug" situation a few years ago. Go chariot, youll be fine. Sent from my LG-H811 using Tapatalk Has to be what he's thinking about that's the only negative thing I've heard about their heads Sent from my iPhone using Tapatalk Quote
JordyRoo Posted December 9, 2015 Author Report Posted December 9, 2015 Poor materials sorry, was in bed when i posted that. Yeah i read about a plug in the material. But if all is well then ill stick one on my list. Thanks guys. Quote
trickedcarbine Posted December 9, 2015 Report Posted December 9, 2015 Poor materials sorry, was in bed when i posted that. Yeah i read about a plug in the material. But if all is well then ill stick one on my list. Thanks guys.That was my head. The situation was remedied. Jerry ultimately made it right. Quote
willaduncan Posted December 9, 2015 Report Posted December 9, 2015 these heads do fit tight around the studs! small trick is to not bolt down the cylinders tight until you have the head on it will slip right in like a 2$ hooker and a asian man love stick I personally run a chariot and so does my other buddy... their both newer heads around 1year old or so... I thought that was normal for all heads, I just use a small rubber mallet and lightly tap each side down Sent from my iPhone using Tapatalk Quote
Bennett131 Posted December 9, 2015 Report Posted December 9, 2015 You shouldn't have to force it down. Quote
tfaith08 Posted December 10, 2015 Report Posted December 10, 2015 Mine was a tight fit. Not overly tight, but it did need a little push to get it seated. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.