willaduncan Posted October 22, 2015 Report Posted October 22, 2015 I ran the stock stroke hard core mx port back in '11, it was a badass job, the quad had tons of power. This work not so much looks like he forgot to finish the job. I'd send him a link to this thread to see what his response is Sent from my iPhone using Tapatalk Quote
sheerider11 Posted October 22, 2015 Report Posted October 22, 2015 Same as last time. We don't know what we're talking about or what we're looking at. He'll raffle off a free port job to a un active member that will only come into say how bad ass it is and how great Kevin is. Then dissappear. Same song and dance as last time. Quote
Sandking Posted October 22, 2015 Report Posted October 22, 2015 Had him do a mx port for a friend this summer I'll let you know how it runs next weekend in glamis. Still say I'm happy with my dune port and he ported a friends and he's also happy. I don't know shit about porting like others but put it together and let's see how you like it. Quote
trickedcarbine Posted October 22, 2015 Report Posted October 22, 2015 ^ No! Chamfer the ports, then put it together. 1 Quote
registered user Posted October 23, 2015 Report Posted October 23, 2015 i wouldnt chamfer nothing if you dont know how. otherwise youll have it fuked up. ports will open before theyre supposed to etc. Quote
n2otoofast4u Posted October 23, 2015 Report Posted October 23, 2015 Whats up snomobra??????????????? Lets see some more pics of these masterpieces! Notice the smooth bore and cross hatch of the cylds that are posted above?? Notice the chamfering? You ran your cock holster and now not a peep. Quote
Andreb84 Posted October 25, 2015 Report Posted October 25, 2015 I was just thinking about letting hjr build a 10 mill cub for me..,but I kept looking at the price I spent way more then 1500 on my 4 mill set up how is it possible that I can get a 10 mill from hjr without it being junk A 10 mill crank on eBay is 900 all day but he can sell you one for almost half that price??? Sounds to good to be true..what's wrong with the cranks he sells and why is his work so cheap Quote
sheerider11 Posted October 25, 2015 Report Posted October 25, 2015 I was just thinking about letting hjr build a 10 mill cub for me..,but I kept looking at the price I spent way more then 1500 on my 4 mill set up how is it possible that I can get a 10 mill from hjr without it being junk A 10 mill crank on eBay is 900 all day but he can sell you one for almost half that price??? Sounds to good to be true..what's wrong with the cranks he sells and why is his work so cheap are you still looking for a reason to be talked out of it? You seem committed to going there already. Cheap-fast-reliable: pick 2. Quote
possum Posted October 25, 2015 Report Posted October 25, 2015 I can get you the best 10mm crank on the market for $800. Not no junk egay or hjr garbage Quote
willaduncan Posted October 25, 2015 Report Posted October 25, 2015 HJR is just fine for basic stuff normally but anything other than that I would go elsewhere Sent from my iPhone using Tapatalk Quote
locogato11283 Posted October 25, 2015 Report Posted October 25, 2015 I can get you the best 10mm crank on the market for $800. Not no junk egay or hjr garbage Spill the beans. Quote
Andreb84 Posted October 25, 2015 Report Posted October 25, 2015 Im not committed to anything yet its not impossible to get good work for cheap but alot of the times its also a red flag just trying to figure out which category hjr falls under...cheap as in unreliable time bomb or good work for low prices Why is the crank so cheap?? Quote
n2otoofast4u Posted October 25, 2015 Report Posted October 25, 2015 Im not committed to anything yet its not impossible to get good work for cheap but alot of the times its also a red flag just trying to figure out which category hjr falls under...cheap as in unreliable time bomb or good work for low prices Why is the crank so cheap?? Do some research on here. It will be rather easy to see which category hjr falls in. 1 Quote
registered user Posted October 25, 2015 Report Posted October 25, 2015 for 8 bills its probly all chinese or taiwan. you cant barely take apart a +4 hotrods and put good bearings on it for 8 bills Quote
sleeper06 Posted October 26, 2015 Report Posted October 26, 2015 It's 800 alone for billet webs from crankworks, I can do a wsm 10 with good Japanese or German bearings for 800 . Nothing is bulletproof Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.