camp0429 Posted April 18, 2015 Report Share Posted April 18, 2015 Check out the tech section on lower end walk through, that with a clymers you'll be headin in the right direction Quote Link to comment Share on other sites More sharing options...
tasman_08 Posted April 18, 2015 Author Report Share Posted April 18, 2015 Alright I'm heading out to brothers tomorrow to tear it down ill post more tomorrow thanks for the help Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted April 18, 2015 Report Share Posted April 18, 2015 Label everything and use zip lock bags or trays, something to keep organized. Cell phone pics will save your ass. 1 Quote Link to comment Share on other sites More sharing options...
98_sheester Posted April 18, 2015 Report Share Posted April 18, 2015 Yes pics of a few angles for each part you pull off is how i like to do it that way i know how everything sits but thats jus me but pics will deff help Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted April 18, 2015 Report Share Posted April 18, 2015 Should have washed it before tearing it down. Quote Link to comment Share on other sites More sharing options...
98_sheester Posted April 19, 2015 Report Share Posted April 19, 2015 So whats the damage on this im curious still Quote Link to comment Share on other sites More sharing options...
tasman_08 Posted April 19, 2015 Author Report Share Posted April 19, 2015 So I tore it all down figured out that the previous owner sheared some gears and replaced them I matched my pieces to the new tooth on on of the gears ... Perfect match so the problem was solved Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
tasman_08 Posted April 19, 2015 Author Report Share Posted April 19, 2015 But I have a new problem while trying to tear it apart I tore up on of these coils, I put black tape around it, put it all back together and now I don't have spark, so my question is will breaking a few of those wires on one of the coils prevent it from sending a spark? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
tasman_08 Posted April 19, 2015 Author Report Share Posted April 19, 2015 Also when I pull my clutch in and try to move it there's some resistance like it's still kind of in gear Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted April 19, 2015 Report Share Posted April 19, 2015 Did you split your cases? How did you do that to your stator? Sent from your mammy house Quote Link to comment Share on other sites More sharing options...
tasman_08 Posted April 19, 2015 Author Report Share Posted April 19, 2015 Yes I did I was trying to break the nut on my fly wheel and I stuck a screw driver in there to try and hold it and tore the shit out of one of those coils now I don't have any spark Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted April 19, 2015 Report Share Posted April 19, 2015 Lol, I'd say not. Sent from your mammy house Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted April 19, 2015 Report Share Posted April 19, 2015 You will need a new (good used OEM) stator. Start a wanted thread... take a pic of the plug Most Banshee's don't roll easily in gear cold with just the clutch pulled in, not that something could not be messed up. Quote Link to comment Share on other sites More sharing options...
tasman_08 Posted April 20, 2015 Author Report Share Posted April 20, 2015 Any ideas why I would have coolant coming out of my exhaust or in my cylinder head, I only split the base of the head from the case I never split the top... WTF Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted April 20, 2015 Report Share Posted April 20, 2015 Head gasket is not sealing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.