RACxEMxWILLIE Posted April 3, 2013 Report Posted April 3, 2013 Anyone got any tips on how to do this and whats the best method to do so? Quote
RACxEMxWILLIE Posted April 3, 2013 Author Report Posted April 3, 2013 Yeah but where do i route the the hose that runs to the tank? Quote
possum Posted April 3, 2013 Report Posted April 3, 2013 Straight down to the ground from where it comes out of the rad. Quote
Jereme6655 Posted April 3, 2013 Report Posted April 3, 2013 a lot of guys will run it down and at the very end aim it over their pipe......they do this so IF the bike gets hot enough or has a problem where it starts puking coolant....it'll land on the hot pipe and create that certain smell of burning coolant. Quote
possum Posted April 3, 2013 Report Posted April 3, 2013 yea i knew someone was gonna say aim at the pipe. i dont cause like nice looking pipes. But hey mine has never overflowed anyway. Quote
D.N.K Posted April 5, 2013 Report Posted April 5, 2013 I ran the hose from the top of the rad to the right side pipe. I over heated it one night (30 degrees C and tight woods) and I would have never known if it had not been for the smoke from the coolant hitting the pipe. The reason why I got rid of mine was on hills the coolant would leak out of the bottle, but having a indication the bike is getting to hot is good too. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.