Jump to content

Recommended Posts

Posted

So i wanted to see the performance gain of some T-5 pipes and toomey 2in1 air filter i picked up. i'm running 300 main 27.5 and needles at the 4 clip 20 in tires stock gearing.

stock 58 mph

pipes, filter and jets 70mph!

gained 12mph over stock! Im new to banshees and so far im very impressed with such easy mods/ power ratio

now what should i do next with in reason?

Posted

An adjustable timing plate set to +4* is good for another couple ponies.

 

At what altitude do you ride?

 

300 mains seems rich.

 

I run 27.5 pilots, 290 mains and the needle on the middle clip at sea level in 65* weather with pod filters.

 

With altitude and hotter air temps you need to jet leaner.

Posted

100+ of course as clocked by my buddy's mud truck. Scary fast!

Posted

to hit your speed with 20" you will need to spin 10K rpm and run 14/40 gearing.

or 15/40 at 9300rpm

 

and doubt your engine has the power to hit those speeds with just pipes.

 

 

 

 

wonder how accurate that app is.

actually it has a few bolt ons. like cool head 19cc domes, 100octane fuel, reeds, bored carbs, 22" tires on the rear and ill have to double check but i believe its 15/39

Posted

Years ago there was a police radar put on the main road of my neighbor and with simple bolt on mods 14/42 gearing and 22" tires I hit just over 80 on pavement. Seems about right to me. shrug03.gif No reason I shouldn't be able to hit 9200-9500 RPM with that set up.

Posted

100+ of course as clocked by my buddy's mud truck. Scary fast!

ppffff 100mph your banshees slow as fuck my clocked 125mph with a 3.11 et but this was clocked with my scooby doo stop watch.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...